Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

Cant wait till tomorrow!

Thread Tools
 
Search this Thread
 
Old Jan 10, 2008 | 12:21 PM
  #1  
Pure Playaer's Avatar
Thread Starter
Evolved Member
15 Year Member
iTrader: (14)
 
Joined: Jul 2006
Posts: 2,444
Likes: 0
From: Boynton Beach, Florida
Cant wait till tomorrow!

Well tomorrow finally fixing / finishing my car!

Extremely crammed packed day ahead of me, hopefully it all works out as planned

Driving 3 hours to TTP at 6 in the morning, to meet them at 9 to get my new Cosworth M2 Cams, and AEM Meth kit installed, Then driving to CFT meeting them by 12 or 1, getting my AEM EMS installed including the 5bar map sensor and air temp sensor i just bought to go speed density, then having CFT dyno tune it! WOOT

Looking for 500whp stock block, 93 octane, 100% meth, about 28-30psi on a mustang dyno

After getting tuned at CFT im driving back down to west palm beach (3 hour drive) and going STRAIGHT to the track to see what kind of 1/4 mile times i can put down!

Anyone have any predictions for me? GT35r, aem ems, meth, cams. thinking 130mph trap? high 10s? low 11s?

yay
Reply
Old Jan 10, 2008 | 12:27 PM
  #2  
DRAGHICI's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jun 2007
Posts: 970
Likes: 42
From: Here
do you have a cage?

if not they will kick you off the track after your first run.

so if I was you make that first one the best one.
Reply
Old Jan 10, 2008 | 12:29 PM
  #3  
Pure Playaer's Avatar
Thread Starter
Evolved Member
15 Year Member
iTrader: (14)
 
Joined: Jul 2006
Posts: 2,444
Likes: 0
From: Boynton Beach, Florida
nah im going to baby it my first couple runs to get use to it, because right now im only at about 375-400whp. then make my last run or two the best

what mph or trap do u need to go to have a cage?
Reply
Old Jan 10, 2008 | 12:41 PM
  #4  
rcheung's Avatar
Evolved Member
iTrader: (15)
 
Joined: Oct 2004
Posts: 2,203
Likes: 1
From: East Coast
How much track time have you put in so far?
Reply
Old Jan 10, 2008 | 01:17 PM
  #5  
Pure Playaer's Avatar
Thread Starter
Evolved Member
15 Year Member
iTrader: (14)
 
Joined: Jul 2006
Posts: 2,444
Likes: 0
From: Boynton Beach, Florida
a good 20 runs id say, maybe more?

only best of 1.8 60' and a best of i think 12.3
Reply
Old Jan 10, 2008 | 02:29 PM
  #6  
chaotichoax's Avatar
EvoM Staff Alumni
iTrader: (149)
 
Joined: Apr 2005
Posts: 6,108
Likes: 18
From: New Jersey
ummm giving ttp three/four hours to install a meth kit and cams

that's kinda cutting it close
Reply
Old Jan 10, 2008 | 02:47 PM
  #7  
MANGOOK's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2003
Posts: 900
Likes: 0
From: Boca Raton, FL
Chris i wish you the best with the car but hopefully you have got a lot better behind the wheel and what not. I will say about a 124-127 with you driving and going to moroso.
Reply
Old Jan 10, 2008 | 07:57 PM
  #8  
Pure Playaer's Avatar
Thread Starter
Evolved Member
15 Year Member
iTrader: (14)
 
Joined: Jul 2006
Posts: 2,444
Likes: 0
From: Boynton Beach, Florida
Originally Posted by MANGOOK
Chris i wish you the best with the car but hopefully you have got a lot better behind the wheel and what not. I will say about a 124-127 with you driving and going to moroso.
thanks man, ive gotten a helllll of alot quicker with my shifts, and my launches have been getting alot smoother. but im hoping for the best! thanks bro

ill post some results n everything tomorrow night!
Reply
Old Jan 10, 2008 | 11:17 PM
  #9  
heavens turbo's Avatar
Evolved Member
 
Joined: Apr 2006
Posts: 791
Likes: 4
From: california, bay area
prediction, blown motor, 2 weeks. LOL. good luck!
Reply
Old Jan 11, 2008 | 01:59 AM
  #10  
Pure Playaer's Avatar
Thread Starter
Evolved Member
15 Year Member
iTrader: (14)
 
Joined: Jul 2006
Posts: 2,444
Likes: 0
From: Boynton Beach, Florida
lol.. im not going to be running it hard besides at the track, meth will be sprayed progressively at a higher psi so i dont use it more then needed.
Reply
Old Jan 11, 2008 | 02:54 AM
  #11  
Evo8's Avatar
Evolved Member
iTrader: (24)
 
Joined: Apr 2006
Posts: 1,666
Likes: 0
From: Cleveland, OH
Wow, good luck to you man
Reply
Old Jan 11, 2008 | 06:12 AM
  #12  
scottatyamaha's Avatar
Evolved Member
iTrader: (21)
 
Joined: Jan 2004
Posts: 2,210
Likes: 0
From: South Carolina
Depends on what track you go to. Here at my local track if you run 11's you have to wear a helmet and if you run 10's you have to have a cage.
Reply
Old Jan 11, 2008 | 07:02 AM
  #13  
Forrest Gump 9's Avatar
Evolving Member
iTrader: (19)
 
Joined: Oct 2006
Posts: 474
Likes: 0
From: #1 Land
Originally Posted by Pure Playaer
lol.. im not going to be running it hard besides at the track, meth will be sprayed progressively at a higher psi so i dont use it more then needed.
AEM can spray progressively?? Wow, let me know how's that work out. I'm shopping for a meth kit too but can't seem to bite the bullet and go with THE Aquamist HFS-5 when AEM unit is 1/2 the price.

As far as your schedule go, good luck. You're cutting everything real close. And for the safety rules go. 13.99's or faster you need helmet. 11.50's or faster you need a cage.
Reply
Old Jan 11, 2008 | 08:24 AM
  #14  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Chris has been here 2 hours and the Meth injection install is complete. Cosworth cams are being finished up as we speak.
Reply
Old Jan 11, 2008 | 09:46 AM
  #15  
PSIcho's Avatar
Newbie
iTrader: (6)
 
Joined: Sep 2007
Posts: 84
Likes: 0
From: Tampa, FL
Very impressive!
Reply



All times are GMT -7. The time now is 09:17 AM.