2026: What Did You Do To Your Evo Today?
well....
I kinda did a combo job of both, but could get it done in an hour. It is very easy to do. I had to run to Home Depot to get a pair of spring clip pliers. The spring clip you have to remove has very small holes, and the pliers I bough from Autozone did not fit. So with the right tools you can get it done very quickly.
I kinda did a combo job of both, but could get it done in an hour. It is very easy to do. I had to run to Home Depot to get a pair of spring clip pliers. The spring clip you have to remove has very small holes, and the pliers I bough from Autozone did not fit. So with the right tools you can get it done very quickly.
Evolving Member
Joined: Mar 2015
Posts: 180
Likes: 1
From: Boring Oregon
I ripped off one of my wind deflectors after I realized I had left my keys in my car 
Thankfully my window was open slightly and I was able to use the wind deflector to press the unlock button
That's good to hear!
I ordered a nice pair of channellock spring clip pliers a few weeks ago getting ready to do this, but haven't grown a pair yet to go through with it
Thankfully my window was open slightly and I was able to use the wind deflector to press the unlock button well.... I kinda did a combo job of both, but could get it done in an hour. It is very easy to do. I had to run to Home Depot to get a pair of spring clip pliers. The spring clip you have to remove has very small holes, and the pliers I bough from Autozone did not fit. So with the right tools you can get it done very quickly.
I kinda did a combo job of both, but could get it done in an hour. It is very easy to do. I had to run to Home Depot to get a pair of spring clip pliers. The spring clip you have to remove has very small holes, and the pliers I bough from Autozone did not fit. So with the right tools you can get it done very quickly.I ordered a nice pair of channellock spring clip pliers a few weeks ago getting ready to do this, but haven't grown a pair yet to go through with it
I ripped off one of my wind deflectors after I realized I had left my keys in my car Thankfully my window was open slightly and I was able to use the wind deflector to press the unlock button
That's good to hear!
I ordered a nice pair of channellock spring clip pliers a few weeks ago getting ready to do this, but haven't grown a pair yet to go through with it
Thankfully my window was open slightly and I was able to use the wind deflector to press the unlock button That's good to hear!
I ordered a nice pair of channellock spring clip pliers a few weeks ago getting ready to do this, but haven't grown a pair yet to go through with it
https://www.evolutionm.net/forums/ev...aft-seals.html
I bought the exact same pliers that are in the how-to from Home Depot. No, Lowes did not have the right ones
Evolving Member
iTrader: (6)
Joined: Apr 2012
Posts: 326
Likes: 2
From: Driving ten under in the passing lane, right turn signal on at all times.
The usual things you do with an Evo, drove to get cat food and groceries. On the way home I experienced the Mother of All Ricer Flybys, performed by a family from the subcontinent in a Nissan maxima.
Newbie
Joined: Mar 2015
Posts: 16
Likes: 0
From: Swindon
Had a large batch of goodies arrive today!
Hallman Pro RX Manual Boost Controller
Double Pillar Pod
Boost Gauge
Air/Fuel Ratio Gauge
Ralliart CF Gear Knob
Ralliart CF Handbrake Handle
Weapon R Intake Manifold
Just need to get home from work and fit now!
Hallman Pro RX Manual Boost Controller
Double Pillar Pod
Boost Gauge
Air/Fuel Ratio Gauge
Ralliart CF Gear Knob
Ralliart CF Handbrake Handle
Weapon R Intake Manifold
Just need to get home from work and fit now!
On a different note, I curbed a wheel slightly while pulling into a small parking area. Only the second time I have ever curbed a wheel. I also let a female friend drive it, first time she has ever driven an Evo
and it was funny to see her face when the boost started to climb. 
Not Evo related but I bought a motorcycle over the weekend as well.
That's hilarious!
On a different note, I curbed a wheel slightly while pulling into a small parking area. Only the second time I have ever curbed a wheel. I also let a female friend drive it, first time she has ever driven an Evo and it was funny to see her face when the boost started to climb.
Not Evo related but I bought a motorcycle over the weekend as well.
On a different note, I curbed a wheel slightly while pulling into a small parking area. Only the second time I have ever curbed a wheel. I also let a female friend drive it, first time she has ever driven an Evo
and it was funny to see her face when the boost started to climb. Not Evo related but I bought a motorcycle over the weekend as well.
What motorcycle did you buy? I got my permit again after letting it expire 5 years ago. I'm going to be taking the training course and hopefully getting my license. I was originally thinking of getting a supermoto or a 300cc supersport, but I don't think I'll be happy without a 600cc supersport
Evolving Member
Joined: Mar 2015
Posts: 180
Likes: 1
From: Boring Oregon
Just a friendly advisor to......keep an eye on that intake manifold ( high boost equals manifold explosion)
And prepare for cursing!
Newbie
Joined: Mar 2015
Posts: 16
Likes: 0
From: Swindon
Evolving Member
Joined: Mar 2015
Posts: 180
Likes: 1
From: Boring Oregon
Either port yours.....or go Magnus or AMS
A ported stock manifold is good for high hp if your on a budget