"Correct" Catch Can Setup???
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Aug 2006
Location: Johnstown,PA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
"Correct" Catch Can Setup???
As the title states, I'm looking for the "correct" way to set up a catch can for an Evo. I have searched and seen many different hose paths, PCV elimination/relocation, and some factory provisions eliminated. Nearly all posted setups have disagreement and changing the original setup posted.
What tends to be the best hose layout/route?
Is the PCV relocated, or eliminated?
Can the hose be deteled from the intake pipe?
Best mounting location?
Best Catch Can for the car?
What tends to be the best hose layout/route?
Is the PCV relocated, or eliminated?
Can the hose be deteled from the intake pipe?
Best mounting location?
Best Catch Can for the car?
#2
Evolved Member
iTrader: (58)
Join Date: Aug 2007
Location: Van Buren, OH
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
Expensive, But best can and set-up by far! recirculates the oil straight back into the dipstick tube and down into the pan. Which also vents the oil pan!
https://secure.buschurracing.com/cat...c260f587d6f141
https://secure.buschurracing.com/cat...c260f587d6f141
#3
EvoM Staff Alumni
iTrader: (15)
Join Date: Apr 2002
Location: Wisconsin
Posts: 2,464
Likes: 0
Received 0 Likes
on
0 Posts
Closing this thread.
Search for this. There's no less than 100 threads on this, with many, many heated debates.
You want catch can information? Start here:
https://www.evolutionm.net/forums/en...atch-cans.html
Search for this. There's no less than 100 threads on this, with many, many heated debates.
You want catch can information? Start here:
https://www.evolutionm.net/forums/en...atch-cans.html
Last edited by Fireball; Feb 26, 2009 at 07:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
fugiwara
Evo Engine / Turbo / Drivetrain
47
Apr 13, 2008 05:54 AM