Hi, I have a Blitz FATT turbo timer, but I don't have the wiring harness for it. I was wondering if there was a writeup somewhere on how to install it without the harness.

Thanks in advance.

 

I would go ahead and get the harness if I was you, it makes for a simple install and makes removal easy.

 

yea, so you dont have to cut the car's adapter off and splice wires in what little room you have.

 

I think there is a write up in the Install forum. Just do a search. But I would go ahead and fork out a few more $$$'s and get the harness. It took me no time to take apart the underside of the steering column and pop out the center console to run the wire to the e-brake. Plug and play baby!

 

I agree, definetly get the harness. You can get it over the net at Lancershop.com for $28 after shipping. It'll save a lot of time and work. I had to drill a hole to tap into the engine for the boost gauge. That was a b!tch to do.

 

take apart your steering column and then you'll see why we all got the harness.. it takes 10 minutes with the harness... you'd have to be a very very patinet person to do that w/out a harness....

 

It's just a bit of soldering, but the harness really does facilitate things. You can grab a GReddy harness and use that. Works just fine.