ok just got my evo delivered about 3 mins ago, got one quick question.

Should i have 2 let the clutch out alot 2 get the car in gear, it seems like there is alot of play before the clutch engages the car.

thanks!

 

My stock clutch is the same; engagement point is very high. Is yours still on the stocker?

 

sorry for not being clear, was a quick post

its a 2003 evo and it has a stage 3 clutch

 

stage 3 what?

could be adjustment, install, or ready to be replaced....its hard to say, ask the seller how many miles are on it and how hard he drives it. If he is being truthful and says not many and easy then it could be an adjustment issue, improper install, or just "the way it is". If he says lots and hard, its probably time for a new clutch.

 

My clutch releases semi-high, Its a ACT street disk. My girlfriends car has a excedy triple disk, Her clutch engages very very low. The exedy twin disk releases where i think a clutch should release, About half way out.

 

its a clutchmasters stage 3

 

I think it depends on the clutch pedal adjustment,No ? My exedy twin was engaging a little bit under half way and it's now adjusted and it is super low which is better imo...

 

like this clutch engages about 1 inch from it being completely out

 

Yea,Mine is the same way....My clutch is still brand new basically also,Has about 250 miles on it,It's a different clutch,but i think it is all in the pedal adjustment...

 

All you need to do is a pedal adjustment and it should be fine!

 

+5 for pedal adjustment.

 

http://www.evomoto.com/tech_info.php?tech_id=28

I have mine almost all the way up on the adjustment and it still grabs fairly low. I've had instructors stall the car in grid.

 

I just got my evo yesterday and might have to give the adjustment a try.

 

Mine is stock and the clutch feels like any other stick shifter.

 

post pictures.