How many of you like the hta86 on the 2.3liter. For those of you who have it:
when do you start to spool?
when you do you hit full boost?
how much hp/tq are you making?
Which clutch are you using?

 

Search. You cant do a better combo then a hta86 on a 2.3rpm motor. You get everything with that setup

 

When I type in the search box, nothing drops down anymore.

 

look up br car and reese tuning rs i know that reese tuning rs has that 2.3 with an hta3586

 

James Reese and David Buschur are both running the Buschur Racing 2.3 RPM Stroker with Forward Facing HTA 86. Search for either of the cars and their results.

 

Yeah, I just checked them out. But those are drag cars. I'm looking for a highway car, that'll more than likely work for me though.

 

I run the hta86 on the 2.0 and i can tell you the top end this car has is insane. It does not stop pulling

 

I know that's right, but I cannot rev it out like you bro. 8200 is were I'll be shifting.

 

Im on stock head and block. I keep it under 8,000rpm...

If you go with a 2.3rpm motor you can rev that thing way out. The powerband is just nuts

 

I'm on a 2.3 stroker, GSC s2, springs, retainers, and valves. How much power hp and tq are you making, when are you hitting full boost?

 

My car made right around 490whp and 380tq on CBRDs mustang dyno at only 25psi of boost. We kept torque low on purpose for the sake of being stock block

 

if your looking for a highway car why go 2.3?

 

I had it built when I was really interested in an fp red.

 

What turbo are you running on it now? I'm running a 35R with a .63 hotside on my 2.3, but I plan on possibly upgrading my turbo to the HTA. I've also considered swapping over to an FP Red as well so I can have a turbo that responds sooner.

 

I'm seeing spool by 3200 rpm, Boost comes on so quick. I don't recall exactly where full boost is hitting but its just over 4K.
This is with a 2.4L G4CS block (6bolt) FP3 cams and a precision converter in my auto trans DSM.
The FP 3586HTA is the best turbo I've ever owned.