Hey Guys I'm new to this forum I've been trolling for a long time before i finality got my ride. Shes a 2006 Evolution MR "Wicked-White/Black-Blue" I've tried searching but can't come up with anything. Whats the fastest someone has gone down the 1/4 with factory internals? Thanks!

 

Some have gone low 11's on stock internals and a bunch of bolt ons. Also depends on the driver.

 

https://www.evolutionm.net/forums/dr...up-inside.html

https://www.evolutionm.net/forums/dr...rd-broken.html

 

I thought a couple people went 9s with 100% stock blocks....

 

Congratulations for the Mr I have one too.I went 11.1 at 127 mph.

 

I have atleast two go 9's on stock internals one is a local friend ryu

 

its a ticking time bomb though. cost of pistons and rods vs building another block built?

saw a WW evo getting off 114 today you?

 

Yeah I think so too, just ran across a couple of the stock turbo/longblock ones since they seemed to fit the stockness of the OP's post.

lillev23 ran 9's on the stock block with a FP Black

 

It's deff possible to go 10's or maybe even 9's on a stock block. but like stated above, its a ticking time bomb.

I risked my whole motor trying to reach 580 on a stock bottom end, have I dont it again? No... Just did it for dyno purposes! lol

 

High 9's is the fastest the stock block has gone

 

114? Off the Parkway?


Thanks for the input guys!

 

This. Guy from Georgia. Lilevo23 or something like that.

 

Well that info is not correct. Some of it anyways. Stock block/stock turbo record was held by Ronnie Soliman, not Curt Brown. But STM blew that out of the water by .2 seconds by going 10.5, haha. Congrats to STM - they have some of the sickest cars out there, and The Ricer is going to look even better next year!!

 

Stm has gone faster then a 10.5 on stock block. They went 9s on a stock motor and fp red

Check it out
http://m.youtube.com/index?desktop_u...?v=jH9jp1HtLX8

 

You're welcome