Who is interested in swapping to the JDM/EUDM Electronic HVAC Controls?
#31
Evolved Member
iTrader: (34)
This and the JDM mirrors have always been in the back of my mind. Be the first one to make it work and blaze the trail for the rest of us!
EDIT: also I thought the HVAC was linked to the ETACS, since the defroster button should trigger the heated side mirrors too. Is this not the case?
EDIT: also I thought the HVAC was linked to the ETACS, since the defroster button should trigger the heated side mirrors too. Is this not the case?
Last edited by deeman101; Feb 3, 2012 at 09:50 AM.
#35
Since it was absolutely impossible for me to find a used air mix assembly from someone in Spain, Germany, or Russia, and I'm not about to pay over a grand for a new one, I bought a used assembly from a USDM Evo VIII. I will be purchasing a single motor assembly only from a LHD model, and the rest of the stuff from a used RHD EDM model. I may have to do a bit of "custom" work to get this thing to work. I will know more once the motor comes in.
-Acree
-Acree
#43
Evolving Member
iTrader: (5)
Needed parts -
1. Heater assy - MN124235 it's the same that we have, but stepper motors on levers ... There is a way to get the motors and levers, and DYI the stock core ...
1.1 The HEATER AIR CONTROL DAMPER (Lever) kit, for temp, and position - 7801A011
1.2 The Heater control motor - MR 568607 & MR 568606, one for temp, other for position ...
2. CONTROLLER ASSY,AUTO A/C - 7820A103, this is controller and AutoClimate ECU, no need to change ETACS ... and small box for it - MR 626799
3. Photo Sensor - MR 500655 with harness
4. SENSOR,A/C CONDENSER TEMPERATURE MR 283903 with harness
5. UnderDash Harness - 8522A529, generally we will ned just a little part of it ...
Thats ALL!!! Now u will have all needed parts for like JDM/UK EVO7/8/9 and EDM EVO9 AutoClimate Conversion .,..,
1. Heater assy - MN124235 it's the same that we have, but stepper motors on levers ... There is a way to get the motors and levers, and DYI the stock core ...
1.1 The HEATER AIR CONTROL DAMPER (Lever) kit, for temp, and position - 7801A011
1.2 The Heater control motor - MR 568607 & MR 568606, one for temp, other for position ...
2. CONTROLLER ASSY,AUTO A/C - 7820A103, this is controller and AutoClimate ECU, no need to change ETACS ... and small box for it - MR 626799
3. Photo Sensor - MR 500655 with harness
4. SENSOR,A/C CONDENSER TEMPERATURE MR 283903 with harness
5. UnderDash Harness - 8522A529, generally we will ned just a little part of it ...
Thats ALL!!! Now u will have all needed parts for like JDM/UK EVO7/8/9 and EDM EVO9 AutoClimate Conversion .,..,