Ive had my evo 8 for 9 months now and the ses light comes on and of for three or four days and the light turns off i want to pull the codes but i went to buy a scanner and a good one is like 200 to 300 and i came upon evoscan and with the cable and software i can do even more than just the scanner but i want to get the correct one i found this one but i was reading about pin 9 for the just the subarus and this one is universal were do i get the one with out the pin 9, pin point to the right one sorry for my ignorance

http://www.evoscan.com/evoscan-gps-obdii-cables/details/15/1/performance-vehicle-pc-diagnostic-interfaces/openport-13u-universal-usb-datalogging-and-reflashing-cable

Or is it this the right one

http://www.mellonracing.com/index.php?main_page=product_info&cPath=1_28&produc ts_id=296

 

I have been using the 1.3U cable in the first link for 6 years now with EvoScan.

 

Evoscan and tactrix cable. Read and clear codes and logging capabilities. Tom at tscomptuned.net has a good deal on bundles or tunertools.com. Both should have options for pin removal if necessary

 

Now were do i find the tactrix cable and is it a diferent software?

 

No its the same thing you were linking in the first post. Tactrix 1.3U or 1.3M (pin removed). This is where I got it...

http://tunertools.com/proddetail.asp...y-Wire&cat=382

Most people run the 1.3U just fine, but for a handful it causes an electrical meltdown lol. I just went with the 1.3M to be safe. The #9 pin has no use in our cars

 

Funny, I can never seem to get evoscan to pull codes. Works for everything else tho.

 

Just buy the 2.0 cable with the 8 and 9 cable attachment. thats what i got