Going to rre wed for an e85 tune. will i reach my goal of 400hp? i put down 322hp/339lbs last time on dynapack. mods are cobb intake, megan dp v2, ets licp v2, tanabe medalion exhaust, walbro fuel pump, 3 port ebc, tune. since then ive added an ultimate racing hfc ceramic. 1000cc or 1200cc will be installed on wed. Trying to be stealthy and carb legal since i live in ca.

 

I want to give that 25g kinugawa turbo a try I read a 25 page thread on it aparently you do 420 on pump gas turbo is $899

 

I think with 1200, your will reach your goal if not get close to it.

 

Let us know I'm wondering about that for sure with your mods. Its very possible i think. Even with today's high flow cats you still make great power over stock cats. If u don't get 400hp maybe then try the 272 cams. I have a couple buddies in cali that have had their EVOs pass smog and be legal with 272's and sit at a happy 420-460hp range on e85. u just need a proper tune and RRE is probably the best at tuning EVOs in SoCal right now IMO.

 

Gna fall short without cams/ intercooler

 

i was at 340/330 with TBE, intake, MBC and 255. i installed 1050cc injectos, tuned e85 and got to 405/390. you should get pretty close, but i don think you'll make it. e85 usually ads about 60hp.

 

Came back made 406hp/404lbft on e85.

 

Awesome! What psi was this at? Do you have head studs?

Post up dyno.

 

I didn't see e85, nice number

 

no head studs. all mods above only things new were the rc injectors 1200cc and hfc.