Downpipe question.

Reply Subscribe

Thread Tools

Search this Thread

Mar 10, 2016 | 08:49 PM

#16

XSivPSI

Evolving Member

iTrader: (8)

Joined: Mar 2007

Posts: 421

Likes: 27

From: Huntsville, AL

Quote:

Originally Posted by detroit pistins

Ibbs,
You are running a custom BR HTA35r kit, thus, only BR has the fabrication jig to make you another recirculating dumptube/O2/downpipe combination because the manifold position with respect to the turbo is unique.
The picture posted above will not work because it is made for a stock frame type of turbo with an internal wastegate.

Your best bet is to go to your local wedl/fabrication shop and ask them to quote recirculating the current dump tube into the down pipe. Otherwise, you can ask BR if they still have the jig for your manifold and could make you a new piece to fit your needs.

The picture I posted was just an example of their work. I believe they can make pretty much anything and are within a few hours drive of OP. Just a suggestion.

Mar 10, 2016 | 08:54 PM

#17

detroit pistins

Evolved Member

iTrader: (102)

Joined: Aug 2007

Posts: 2,173

Likes: 19

From: Detroit

Quote:

Originally Posted by XSivPSI

The picture I posted was just an example of their work. I believe they can make pretty much anything and are within a few hours drive of OP. Just a suggestion.

I understand

..... didn't want him to buy that particular one thinking it would work.

Mar 11, 2016 | 04:39 AM

#18

Ibbs

Thread Starter

Newbie

iTrader: (1)

Joined: Feb 2016

Posts: 21

Likes: 2

From: Augusta, GA

Quote:

Originally Posted by detroit pistins

This is correct. This is the same thing that BR told me so I thank you for the info. I found an awesome guy in Atlanta who is going to custom fab it for me for under $400. Thanks again for the help here!