Hello everyone,

I'm doing a 64 built. I do need to get an oil pan because the stock one is not reusable. Anyway I just want to make sure will this work with a 4g64 crank/block and Evo 9 oil pan? Is it even worth getting or should I just get the stock components?
http://realstreetperformance.com/Sho...-4G63-Oil.html

Thank you so much everyone.

 

Nobody? I can't use my stick because it's trashed so I need some advise on the one I posted about. Any help weather I should go with that or something else chime in and give me your 2cents

 

It will work but you will have to do a little grinding because of the longer stroke of the 100mm crank. You will need to grind where the rod passes the scrapper.

 

When I put my 2.3 together, the rod caps hit the sides of the scraper, easy fix, you can either bend it if the block allows, of grind the sides a bit like I did. easy mod, works perfectly..


Ron

 

Thanks guys I will order it tonight.