Ok so I bought a pt 6466 turbo but instead of being a 4 bolt on the o2 housing side it's a flange type..

now do I just need the flange to tighten up the turbo to o2 housing or something else too.?

Here is the 3 inch flange



Here is the flange with the turbo..do I just tighten the flange with the o2 housing on the other side? or do i need something in between?


do I just tighten the flange with the o2 housing on the other side? or do i need something in between?

 

V Band outlet. Yes, your O2 housing or custom fabricated downpipe would connect to the turbo just how you have it in the picture.

Nice Turbo you have there!!

 

I have this discharge v band flange..will this work?

 

As long as both flanges are the same diameter and fit inside the Clamp and are able to be clamped together when tightening the clamp you're all set man.

 

im confused about one thing...do it just mate the o2 housing and turbo together with a clamp or do i need a flange in between them too?

 

You use the clamp.