GSX_TO_EVO

iTrader: (5)

I have been in contact with a company in NJ, Charlie Weston Machining.
He has stated that he has the ability to put oil Squirters in a 4g64 block.
He said it would not be cost effective to do just 1 block, that I would need 5+ blocks for it to done.
He has to write up a CNC program and get the tooling and etc.
would anyone else be interested in getting this done?
He said cost would be around $300 or less depending on how many blocks and the demand for it.

J_Striker

iTrader: (4)

I had them installed in my block. I like the idea of having them.

Good luck with this.

LetsGetThisDone

iTrader: (1)

A good machine shop can do it with a mill. No need to CNC it. Contact English Racing, I think they have a machine shop that does it for them.

blackline

iTrader: (2)

OS are nice to have

GSX_TO_EVO

iTrader: (5)

I called every vendor on here and was turned down except for Magnus Motorsports who quoted me 2200 to have it done and my block assembled, that’s me also providing the parts.

GSX_TO_EVO

iTrader: (5)

There are only pros to having them, no cons to it.

BillAce

iTrader: (2)

Milled into mine

GSX_TO_EVO

iTrader: (5)

Who done the work?

jheff

PM me, going to go to get a block shortly, do you plan on him doing the rest of the machine work for the block or just the oil squirters?

GSX_TO_EVO

iTrader: (5)

PM sent.

kpr

iTrader: (6)

From what I've seen, any good machine shop can do it. Everything is there, just drill and tap.

Pal215

iTrader: (12)

https://www.homemadeturbo.com/hybrid...ck-pics-90115/

The Honda guys have done it....but they're working with aluminum...which is much easier to drill and tap!