Hi guys/girls I have seen many threads helping how to do a boost leak test but no actual pictures of the test. I myself and a friend did one this past saturday and were left with quite a few questions. It would be really helpful for someone who knows and has done it before to post not only what is used but also show pictures of process.

here are some links about boost leak already on evom
https://www.evolutionm.net/forums/sh...oost+leak+test
https://www.evolutionm.net/forums/sh...oost+leak+test

How to do the test
http://www.vfaq.com/mods/ICtester.html

Once again if any1 can take the time and take a few pictures of the process this will be very helpful to many of us here

 

no idea on the evo but kyle does it easy on the srt's ask him to see if the process is the same.

 

THIS is how i test MY system...no where online is there a picture...just that little tool on how to make the tester and where to connect. Picture is through Photoshop(that's what i do for a living so don't ask me what program I used)

Guru's take a look and correct mistakes, my main focus is the bov connections and plug off's.

 

Bump and what does everyone pull off to connect the pressure tester to the turbo. I pulled the intake off and the turbo still seemed hard to get to.

 

The intake comes off. It's still a bit tight, but I used a piece of the stock IC piping instead of the radiator hose. WOrked great and it's got a bit of a bend in it whoch makes it easier to get to.

 

Link doesnt work for me

 

bump for more answers