How to install Magnus smim?
Sep 25, 2010, 02:35 AM
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: louisville, ky
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
How to install Magnus smim?
So I just ordered a magnus sheet metal intake manifold and I have no idea what to do with it. I dont know were my map sensor goes and all my vacume lines and what happened to some sensors. Also I have a walton 75mm throttle body so that is different to. So if I can get a little help on how to install these parts it would be a great help I drive a 2005 evo 8 as well.
Sep 25, 2010, 05:22 AM
#2
https://www.evolutionm.net/forums/ev...n-evo-9-a.html
EDIT: Just remembered you said yours is the SMIM, so I'm not sure how much of the stuff will be the same or different.
EDIT: Just remembered you said yours is the SMIM, so I'm not sure how much of the stuff will be the same or different.
Last edited by Bobster22388; Sep 25, 2010 at 06:01 AM.
Sep 25, 2010, 03:38 PM
#3
I have the same manifold but havent installed it yet. For the map sensor I bought one of these
http://www.extremepsi.com/store/cust...at=1081&page=1
and it fits the map sensor great. You will loose all of the sensors except for the one that is on the throttle body, so you will need a Open port cable and some rom mods to keep those items from giving you check engine lights. Also you will need to figure out a way to mount the dipstick tube.
http://www.extremepsi.com/store/cust...at=1081&page=1
and it fits the map sensor great. You will loose all of the sensors except for the one that is on the throttle body, so you will need a Open port cable and some rom mods to keep those items from giving you check engine lights. Also you will need to figure out a way to mount the dipstick tube.
Thread
Thread Starter
Forum
Replies
Last Post
kewlmeru
Evo How Tos / Installations
1
Jul 14, 2017 09:13 PM
mike244
09+ Ralliart Brakes/Wheels/Suspension
12
Sep 13, 2012 07:32 PM
topturtle
Evo Engine / Turbo / Drivetrain
24
Jan 3, 2009 04:25 PM
