Used SBR Race motor for Sale!!

This is the evo motor, that came out of SBR's Rally car. Wiseco Piston/Eagle Rod motor. This is the same motor that took 5th Place in Sno-Drift Rally, and First place at Perce-Neige in Canada.

It is in perfect running condition, and was only replaced in favor of a motor with a little more displacement. This motor was the factory motor in our Evo 9 Rally car, and had about 400 miles on it before it was torn down and re-assembled with the stronger components. It only has 2 races on it.

2500$ + Shipping!

Also for sale - fully built 2.1l shortblock that took third place at 100 acre wood, will work in EVO IX with Mivec. If you have questions, call for details. This motor still in car, will not ship for about two weeks.

3000$ + Shipping!

Thanks guys,

Chris Boone
Slowboy Racing Inc.
cab@slowboyracing.com
1-724-349-8417 x16

 

so is this a 2.0? how many miles on it??

 

2.0L Yes.

It has less then 2000 Miles since the rebuild.

 

you have a PM

 

2.0L SOLD!!

Still got the 2.1L though!

Chris

 

what kind of internals in the 2.1?

 

Forged 4340 2.0l crank, Manley 162 mm I beams, Wiseco custom 1400 HD pistons, 87 mm bore, ACL bearings.

Mike Huml
SBR Inc.

 

about how much power should it support? also, should it handle 9k RPM with supporting head work? thanks!

 

Most power we have ever made in a 4G63 with the Manley I beams was a little over 700 WHP, this was on a 67 MM turbo. However, I would assume the engine could support 800-900 HP if tuned properly.

We spun the 700 HP motor to 10k a time or two

With the 34 MM restrictor we have to run for open class (rally), we made 400 ft/lbs of torque on a TME 15G at 3500 RPM's, and 290 WHP... damn restrictor!

Mike Huml
SBR Inc.

 

In the original post, you mentioned that the 2.1 will work on EVO IX with MIVEC, are you saying it will only work on Mivec 9 or just that it would also work on mivec IX? Also check your PM. Thanks.

 

This block is currently in an Evo IX with Mivec, but it should be reverse compatible with the non Mivec Evo VIII.

Chris Boone
Slowboy Racing Inc.

 

Got a parts list of what's actually inside?

 

Custom Wiseco Destroker Pistons 9.0:1 (1400 HD, better wrist pin)
Manley 162MM Long Rod I-Beams
ACL Bearings
Custom 4340 88mm Crank

:-D

Chris Boone
Slowboy Racing Inc.
cab@slowboyracing.com

 

bump these guys are awesome good stuff!

 

any work done to the crank? does the the block come with the stock girdle or is it upgraded?