Forge Wastegate Actuator and Unos MBC
So in theory, I dont need a MBC with this spring?
The MBS will help me to get more that 19psi...?
The MBS will help me to get more that 19psi...?
Originally Posted by Mike@Forge
As per the request of numerous Forge dealers and customer, we are now building the Evo actuators with the stiffest spring we offer. The stiffer spring is rated at about 19-24 PSI by itself, so with no boost controller and very little pre-load adjustment, you will make no less than 19 PSI.
The adjustments are made by turning the turnbuckle at the end of the rod IN towards the body of the actuator to increase the spring tension.
If anyone would prefer that their actuator be supplied with a softer spring than the 19-24 PSI version pre-installed in it, a 14-18 PSI spring is available upon request. Individual springs are also available spearately for $16 each if anyone wants to change them at their discretion themselves.
Bump for Greg!
The adjustments are made by turning the turnbuckle at the end of the rod IN towards the body of the actuator to increase the spring tension.
If anyone would prefer that their actuator be supplied with a softer spring than the 19-24 PSI version pre-installed in it, a 14-18 PSI spring is available upon request. Individual springs are also available spearately for $16 each if anyone wants to change them at their discretion themselves.
Bump for Greg!
Originally Posted by GregGSC
Actuators ready to go. and also we have a couple of RS Blow Off Valves ready to ship.
Jorge
Thread Starter
Former Sponsor
iTrader: (44)
Joined: Jun 2004
Posts: 1,159
Likes: 0
From: Charleston SC
Originally Posted by Rastmp
So in theory, I dont need a MBC with this spring?
The MBS will help me to get more that 19psi...?
The MBS will help me to get more that 19psi...?
We have Black Unos, Acutators, and RS BOVs instock and ready to go.
Greg
Hey Greg, I've been trying to reach you...and left a few voicemails at the shop. Still waiting on the gsc 264/272 cams that fedex had "lost" back in December. Pls give me a call or pm me with a tracking # as i'll be leaving for vacation soon.
-Ryan V.
-Ryan V.
