Notices

March ZEITRONIX wideband Madness!

Thread Tools
 
Search this Thread
 
Old Mar 6, 2007 | 08:38 AM
  #1  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
March ZEITRONIX wideband Madness!

For the month of March we will be having special deals on Zeitronix wideband systems for those ready to take their Evo Performance to a more serious level.

These are what separate the drivers from the performance enthusiasts.

We have a few packages below that are numbered. Please review the packages and PM us if you have any questions. When you are ready to make your selection, please send paypal payment to sales @ttp-engineering.com with the package number indicated in the notes section. If paying by credit card, please email us the number of the package you have selected along with your phone number to take your order and card number over the phone.

Again, any questions can be sent via PM, AIM or sales@ ttp-engineering.com.




Package #1- PM for pricing!
Zeitronix ZT2 wideband only for use with laptop for viewing, logging up to 9 hours of datalogging of RPM, TPS, AFR, Lambda, and Aux input 0-5v straight out of the box.

Includes the Zt-2 Wideband Air/Fuel Ratio Meter, Wideband Oxygen Sensor, Sensor Harness, Signal Harness, Datalogging Software, Installation Instructions and 2 pin EGT connector to retrofit your EGT probe.
__________________________________________________ ___________



Package #2- PM for pricing![/
Zeitronix ZT2 wideband PLUS BLACK ANODIZED LCD SCREEN that displays, TPS, BOOST, AFR, Aux 0-5v input. Also for use with laptop for viewing, logging up to 9 hours of datalogging of RPM, TPS, AFR, Lambda, and Aux input 0-5v straight out of the box.
__________________________________________________ ___________




Package #3- $PM for pricing![/
Zeitronix ZT2 wideband PLUS BLACK ANODIZED LCD SCREEN that displays, TPS, BOOST, AFR, Aux 0-5v input. ALSO INCLUDES 3.5BAR (35.5psi) medical grade precision MAP sensor for boost logging! Also for use with laptop for viewing, logging up to 9 hours of datalogging of BOOST, RPM, TPS, AFR, Lambda, and Aux input 0-5v straight out of the box.
__________________________________________________ ___________





Package #4- PM for pricing![/
Zeitronix ZT2 wideband PLUS BLACK ANODIZED LCD SCREEN that displays, TPS, BOOST, AFR, Aux 0-5v input. ALSO INCLUDES 3.5BAR (35.5psi) medical grade precision MAP sensor for boost logging. Also includes low mass, high response K thermocouple EGT sensor for lightning quick EGT logging and viewing on the LCD display. Also for use with laptop for viewing, logging up to 9 hours of datalogging of BOOST, EGT, RPM, TPS, AFR, Lambda, and Aux input 0-5v straight out of the box.
__________________________________________________ ___________






Package #5- PM for pricing!
Zeitronix ZT2 wideband PLUS BLACK ANODIZED LCD SCREEN that displays, TPS, BOOST, AFR, Aux 0-5v input. ALSO INCLUDES 3.5BAR (35.5psi) medical grade precision MAP sensor for boost logging. Also includes low mass, high response K thermocouple EGT sensor for lightning quick EGT logging and viewing on the LCD display. Also includes ZAVT- Zeitronix AUDIO-VISUAL alarm and safeguard trigger. FULLY PROGRAMMABLE warning LED and alarm that you can bas on simple EGT, AFR, BOOST, TPS, RPM and/or COMPLEX warning such as (IF AFR> 12.00 AND BOOST >22PSI AND TPS> 75%, THEN TRIGGER WARNING). This feature works especially well with TTP-Engineering's meth injection systems to insure a trouble free tune. Also for use with laptop for viewing, logging up to 9 hours of datalogging of BOOST, EGT, RPM, TPS, AFR, Lambda, and Aux input 0-5v straight out of the box.

*** This NEWEST VERSION is compatible with meth injection FLOW SENSORS so that the safeguard can be programmed to trigger if the flow sensor slows down and due to a meth injector clog or pump failure.

Old Mar 6, 2007 | 08:40 AM
  #2  
RenoEvo's Avatar
Evolved Member
iTrader: (43)
 
Joined: Oct 2003
Posts: 1,005
Likes: 0
From: Reno, NV
any ETA on the new zeitronix gauge?
Old Mar 6, 2007 | 09:18 AM
  #3  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
We estimate 6-8 weeks.
Old Mar 6, 2007 | 09:20 AM
  #4  
Q8_EVO's Avatar
Evolved Member
iTrader: (67)
 
Joined: Oct 2006
Posts: 1,553
Likes: 0
From: Tucson, AZ
package 4 or 5 shipped to 83702
Old Mar 6, 2007 | 09:59 AM
  #5  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
All PM's returned. Thanks
Old Mar 7, 2007 | 06:35 AM
  #6  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Best wideband advanced tuning system available!
Old Mar 7, 2007 | 07:16 AM
  #7  
Chukee_R's Avatar
Evolved Member
iTrader: (14)
 
Joined: May 2003
Posts: 516
Likes: 0
From: Woodbury, MN
Package 2 or 3 Shipped to 55129

How much boost can Package 2 Read?

I'm primarily interested in A/F Ratio, EGT, and Boost. I want the LCD screen however.

Last edited by Chukee_R; Mar 7, 2007 at 07:25 AM.
Old Mar 7, 2007 | 07:29 AM
  #8  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
The precision medical grade pressure transducer (MAP sensor) can measure to 35.5psi. It is the same top grade map sensor AEM sells for $155.
Old Mar 7, 2007 | 07:31 AM
  #9  
hks-evo's Avatar
Evolving Member
iTrader: (2)
 
Joined: Dec 2005
Posts: 248
Likes: 0
From: your mom
package 2 0r 3 to 24019
Old Mar 7, 2007 | 07:42 AM
  #10  
JustDSM's Avatar
Evolved Member
iTrader: (28)
 
Joined: Jul 2003
Posts: 1,176
Likes: 0
From: Cheyenne, WY
Will the AEM stainless 3.5bar sensor work with this? If so please PM me a price for Package 2. If that combo won't work, then package 3 would be what I need.
Old Mar 7, 2007 | 12:44 PM
  #11  
Evotech8's Avatar
Evolving Member
iTrader: (4)
 
Joined: Nov 2004
Posts: 397
Likes: 0
From: SJ, CA.
Pm package #3 + ZAVT shipped to 94086.

Do you have a wastegate psi "solenoid kit" that will work with the ZAVT trigger?
Looking for a failsafe that willl work with my SMC alky kit.
Old Mar 7, 2007 | 12:53 PM
  #12  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by Evotech8
Pm package #3 + ZAVT shipped to 94086.

Do you have a wastegate psi "solenoid kit" that will work with the ZAVT trigger?
Looking for a failsafe that willl work with my SMC alky kit.
Yes $49 for solenoid and relay is $15.
Old Mar 7, 2007 | 04:27 PM
  #13  
MiamiEvo8's Avatar
Newbie
iTrader: (4)
 
Joined: Aug 2006
Posts: 87
Likes: 0
From: Miami
PM me price on #2
Old Mar 8, 2007 | 10:35 AM
  #14  
TTP Engineering's Avatar
Thread Starter
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
PM's returned. Thanks for the interest in this awesome product!
Old Mar 8, 2007 | 01:46 PM
  #15  
EB05EVOVIII's Avatar
Newbie
15 Year Member
iTrader: (15)
 
Joined: Dec 2005
Posts: 61
Likes: 0
From: GA
PM me on package 3 shipped to 31216



All times are GMT -7. The time now is 06:37 AM.