JIC Magic FLT-A2 from 201 Motorsports
#1
JIC Magic FLT-A2 from 201 Motorsports
201 Motorsports is your source for JIC Magic!
201 Motorsports is proud to be an authorized JIC Magic dealer! Cars equipped with JIC Magic's suspension parts have been TEARING IT UP on the race track this season. Check these bad boys out, drool a little bit from their beauty, then shoot me a PM and get these on your car!
JIC Magic FLT-A1
Originally Posted by 201Motorsports.com
The JIC FLT-A1 is a coilover suspension set up ideal for the enthusiast that will use the suspension on a daily basis and occasionally for the track. FLT-A1 features a 10 way adjustable damper. For strength, strut-type suspensions feature a wide shaft while multi-link type suspensions feature the smaller shaft damper.
FLT-A1s include front pillow ball upper mounts and front adjustable camber plates.
Also included are springs of the linear-type for laser precision handling and adjustable lower brackets for ride height adjustments that do not affect damper travel.
The spring rate on the Evolution-specific FLT-A1's is: 7kg/5kg
Adjustable Dampening
Available for all applications with 10 ways adjustability. With this feature, you are able to tune your suspension dampening up to your spec.
Adjustable Pillow Ball Uppermount
Included for all vehicles for the front and some for rear application. Adjustable camber plate also included for most vehicle front applications with Macpherson Strut suspension systems.
High Tech Twin Tube Dampers
The twin tube dampers show the different sized shafts. because strut-type suspension require more strength for support, the wider shaft (right) is the damper of choice while the narrower shaft (left) is for multi-link / double wishbone suspension.
Height Adjustable Bracket
Adjustable height aluminum CNC machine-built bracket for double wishbone or multilink suspension.
FLT-A1s include front pillow ball upper mounts and front adjustable camber plates.
Also included are springs of the linear-type for laser precision handling and adjustable lower brackets for ride height adjustments that do not affect damper travel.
The spring rate on the Evolution-specific FLT-A1's is: 7kg/5kg
Adjustable Dampening
Available for all applications with 10 ways adjustability. With this feature, you are able to tune your suspension dampening up to your spec.
Adjustable Pillow Ball Uppermount
Included for all vehicles for the front and some for rear application. Adjustable camber plate also included for most vehicle front applications with Macpherson Strut suspension systems.
High Tech Twin Tube Dampers
The twin tube dampers show the different sized shafts. because strut-type suspension require more strength for support, the wider shaft (right) is the damper of choice while the narrower shaft (left) is for multi-link / double wishbone suspension.
Height Adjustable Bracket
Adjustable height aluminum CNC machine-built bracket for double wishbone or multilink suspension.
Normal Price: $1445 shipped
Our Price: $Not 1445 shipped... PM ME!
JIC Magic FLT-A2
Our Price: $Not 1445 shipped... PM ME!
JIC Magic FLT-A2
Originally Posted by 201Motorsports.com
The JIC FLT-A2 is the flagship coilover system. All FLT-A2 coilovers are designed on US-spec vehicles for US streets, fitment and performance is unmatched. Included in the kits are pillow ball upper mounts with adjustable camber plates. For flexibility, the dampers have 15-way compression and rebound adjustability. The spring rates are of the linear-rate type with independent ride height adjustable lower brackets. This allows adjustment without compromising damper compression or rebound travel. Based off of racing technology, the FLT-A2 is a street performance suspension, customizable for full time track use.
FLT-A2s include front pillow ball upper mounts and front adjustable camber plates.
Also included are springs of the linear-type for laser precision handling and adjustable lower brackets for ride height adjustments that do not affect damper travel. They're manufactured using chrome silicon metal alloy with cool bend process.
The spring rate on the Evolution-specific FLT-A2's is: 8kg/7kg
Adjustable Dampening
Available for all applications with 15 ways adjustability. With this feature, you are able to tune your suspension dampening up to your spec.
Adjustable Pillow Ball Uppermount
Included for some vehicles for the front and some for rear application. Adjustable camber plate also included for most vehicle front applications with Macpherson Strut suspension systems. Some applications may come with a rubber bushing uppermount.
Monotube Nitrogen Gas Dampers
High pressure nitrogen gas filled monotube design with special stable viscosity index oil that will not be affected by wide temperature changes. Some applications come with inverted damper system which will give an extra durability to the suspension performance.
Adjustable Height Lower Bracket
More durable than factory brackets with adjustable ride height ranging from 0.5" to 2.5" drop without sacrificing the suspension travel.
Duralumin 6061 Seats
Made out of durable and lightweight alloy, manufactured using machining process.
40mm/45mm Piston
Within the dampers are either a 40mm or 45mm piston along with bump and rebound shims the degine the valving characteristics.
Dust Boot Cover
The dust boot cover protects the shaft of the damper of any debris.
FLT-A2s include front pillow ball upper mounts and front adjustable camber plates.
Also included are springs of the linear-type for laser precision handling and adjustable lower brackets for ride height adjustments that do not affect damper travel. They're manufactured using chrome silicon metal alloy with cool bend process.
The spring rate on the Evolution-specific FLT-A2's is: 8kg/7kg
Adjustable Dampening
Available for all applications with 15 ways adjustability. With this feature, you are able to tune your suspension dampening up to your spec.
Adjustable Pillow Ball Uppermount
Included for some vehicles for the front and some for rear application. Adjustable camber plate also included for most vehicle front applications with Macpherson Strut suspension systems. Some applications may come with a rubber bushing uppermount.
Monotube Nitrogen Gas Dampers
High pressure nitrogen gas filled monotube design with special stable viscosity index oil that will not be affected by wide temperature changes. Some applications come with inverted damper system which will give an extra durability to the suspension performance.
Adjustable Height Lower Bracket
More durable than factory brackets with adjustable ride height ranging from 0.5" to 2.5" drop without sacrificing the suspension travel.
Duralumin 6061 Seats
Made out of durable and lightweight alloy, manufactured using machining process.
40mm/45mm Piston
Within the dampers are either a 40mm or 45mm piston along with bump and rebound shims the degine the valving characteristics.
Dust Boot Cover
The dust boot cover protects the shaft of the damper of any debris.
Normal Price: $2000 shipped
Our Price: $Not 2000 shipped... PM ME!
Our Price: $Not 2000 shipped... PM ME!
WAIT!
You're looking for a track coilover? You don't want to pay your first born child for a proven set up? How about some custom valving specifically done for track/competition usage? EXCELLENT, WE HAVE YOU COVERED!
We also have 1 set of custom-valved FLT-A2's available for you! They are 10kg in the front and 14kg in the rear.
You want 'em?!
PM ME!
You're looking for a track coilover? You don't want to pay your first born child for a proven set up? How about some custom valving specifically done for track/competition usage? EXCELLENT, WE HAVE YOU COVERED!
We also have 1 set of custom-valved FLT-A2's available for you! They are 10kg in the front and 14kg in the rear.
You want 'em?!
PM ME!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jon@vividracing
EvoX 'For Sale' Suspension / Brakes / Handling
4
Dec 30, 2009 12:57 PM
Vivid Racing
Evo X Tires / Wheels / Brakes / Suspension
11
May 25, 2008 06:09 PM
201Motorsports
Evo 'For Sale' Suspension / Brakes / Handling
5
Apr 7, 2008 08:59 AM
Moda2
Evo 'For Sale' Suspension / Brakes / Handling
12
Jul 23, 2007 03:00 PM
Gruppe-S
Evo 'For Sale' Suspension / Brakes / Handling
4
Sep 1, 2005 02:26 PM