We recently started carrying brake components and purchased a large inventory of pads, rotors, lines, and fluid for Evos. So let me know what you need and I'll get you guys the best deals possible! Almost everything is in stock right now, so it will ship out same-day. Every single person who has purchased from Ignition Ready through me on EvoM is very happy they went with us.

We price match as well, so if you think you're getting a deal somewhere else, let me know about it! It doesn't hurt you to shoot me a PM and see what I can do for you. I could potentially save you some good money that could be spent on more parts for your car! We love package deals as well; so if you need a full setup (rotors, pads, lines, and fluid), expect to get an insane deal!!





HPS Street Pads

• HPS Performance Street Compound
• Increased Stopping Power
• High Friction/Torque Hot Or Cold
• Extended Pad Life
• Low Dust
• Virtually Noise-Free

HP+ Street Pads

• HP Plus Compound
• Wide Temperature Range
• Exceptional Stopping Performance
• Without Requiring Brake Change
• Extremely High Friction Output
• Fade Resistant

Performance Ceramic Pads

• Performance Ceramic Compound
• Increased Stopping Power
• Increased Rotor Life
• Ultra-Low Dust
• Extremely Quiet
• Stable Friction Output

Blue 9012 Pads

• Blue 9012 Compound
• Low To Mid Temp
• Low To Intermediate Torque

HT-10 Pads (Front Only)

• HT-10 Compound
• Optimal Temp Range
• High Temp
• Intermediate To High Torque
• Designed For High Deceleration Rates

HT-14 Pads (Front Only)

• HT-14 Compound
• High Temp
• High Torque
• Designed For High Deceleration Rates

DTC-30 Pads (Front Only)

• DTC-30 Compound
• Optimal Temperature Range
• Wide Temp Range
• Controllable Torque
• Smooth Feel And Bite
• Excellent Release Characteristics

DTC-60 Pads

• DTC-30 Compound
• Optimal Temperature Range
• Wide Temp Range
• Controllable Torque
• Smooth Feel And Bite
• Excellent Release Characteristics

DTC-70 Pads

• DTC-70 Compound
• High Temp
• High Torque
• Excellent Modulation And Release Characteristics
• Controllable High Torque w/Smooth Initial Bite
• Unbeatable Pad And Rotor Wear

Yellowstuff Pads

• EBC's Strongest Gripping Pad
• Special Brake-In Coating ensures Proper Bedding
• Beveled Edges and a Center Line Slot for Quiet Braking
• Center Line Slot also Vents in Cool Air to Prevent Cracking from Heat
• Excellent Initial Bite that Improves as they Heat Up
• 12 Month/10,000 Mile Factory EBC Warranty

Yellowstuff Brake Pads are the highest rated friction pad of any EBC Brake Pad. Unlike most race brake pads EBC Yellowstuff Pads do not require warm up to perform at its best, making Yellowstuff great for everyday street use as well.


Redstuff Pads

• Made for Performance & Street Cars
• 60-90% Less Brake Dust than Normal OEM Replacement Pads
• Special Brake-In Coating ensures Proper Bedding
• Beveled Edges and a Center Line Slot for Quiet Braking
• Center Line Slot also Vents in Cool Air to Prevent Cracking from Heat
• Excellent Initial Bite that only Gets Better as They Heat Up
• 12 Month/10,000 Mile Factory EBC Warranty

When you get your Redstuff pads installed and bedded, you will notice instant stopping power because Redstuff pads have a powerful initial bite that actually gets better as they heat up, and will provide you with superior stopping power until your foot leaves the brake pedal. Redstuff Brake Pads are made not only for superior stopping power, they are also 60-90% cleaner than Standard OEM Brake Pads.


EBC Sport Rotors

• Direct Replacement for Worn Out OEM Rotors
• Precision Bored Dimples Vent Pad Gases & Protect Against Brake Fade
• Dimpled Rotors Help Prevent Rotor Cracks Unlike Cross-Drilled Rotors
• Wide Slots help Push Out Hot Gases Helping to Keep Heat to a Minimum
• Slots & Dimples help Promote Even Pad Wear
• Made from High Quality Grey Iron
• Sold In Front & Rear Pairs
• 12 Month/ 10,000 Mile EBC Factory Warranty

EBC Ultimax Rotors

• Direct Replacement for Worn Out OEM Rotors
• Designed for Consistent, Responsive & Quiet Operation
• Great Choice for High Performance driving
• Progressively Angled Slots Provide Ultra Quiet Braking
• Angled Slots Remove Hot Gases and Debris to Maintain Even Pad Wear

StopTech Street Performance Pads

StopTech Street Performance brake pads are engineered to meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions. StopTech brake pads combine the benefits of premium street brake pads with aggressive friction formulas suitable for light track day and autocross use.

Para-aramid composites are specially formulated to provide linear response at both cold and hot temperatures, delivering optimum stopping performance over a wide range of driving conditions.


StopTech PowerSlot Slotted Rotors

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference. Power Slot Slotted Brake Rotors are a true performance rotor and feature:

* Power Alloy castings (on select applications)
- Engineered Performance Rotor
- Superior resistance to cracking due to thermal stress
- Increased molybdenum (higher carbon)content that extends reliability, service life and helps reduce NVH noise issues
- Rotor material is a direct descendant of the patented AeroRotor from StopTech
* Introducing directional curve vane design (on select applications)
- Improved vane design or OE equivalent on all rotors
- Center split castings
* New short slot design runs perpendicular to the vane to preserve rotor strength.
* Direct OE Replacement
* Improved wet weather response
* Increased initial bite
* Double disc ground for a consistent friction surface and Improved pad bed-in
* Mill balanced
* Black E-Coated non-friction surfaces on Power Alloy rotors
* Enhances open wheel appearance

StopTech Stainless Steel Brake Lines

StopTech stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation.

StopTech brake lines consist of a Teflon inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. StopTech brake lines feature a Clear Abrasion Resistant Cover for maximum protection against chaffing

All StopTech Stainless Steel Brake Lines are DOT (United States Department of Transportation) compliant and 100% tested to a pressure of 4500 psi.

StopTech STR-600 & STR-660 Brake Fluid

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company's offerings.

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility.

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd.

StopTech High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

*StopTech STR-600 High Performance Street Brake Fluid*
* Typical Dry Boiling Point: 594F (312C)
* Typical Wet Boiling Point: 404F (206C)
* Minimum Wet Boiling Point: 383F (195C)
* 500mL metal container gives fluid a 25% longer shelf life

*StopTech STR-660 Ultra Performance Race Brake Fluid*
* Typical Dry Boiling Point: 622F (328C)
* Typical Wet Boiling Point: 404F (206C)
* Minimum Wet Boiling Point: 383F (195C)
* 500mL metal container gives fluid a 25% longer shelf life





DBA 4000 Series Rotors

DBA 4000 Series Rotors are a mid-series enhanced performance rotor. These rotors feature Thermal Stability Profiling (TSP) for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.

*DBA 4000 Series rotors are available in slotted or drilled & slotted*


DBA 5000 Series Rotors

DBA 5000 Series Rotors are a high-series enhanced performance rotors. These rotors feature Thermal Stability Profiling for improved heat handling, Thermo-Graphic paint markings for effective heat monitoring and Kangaroo Paw ventilation which runs cooler, stronger and outperforms traditional straight vane disc rotors by up to 20%.

The aircraft-grade aluminum center/hat provides greater resistance to distortion as it allows the disc to expand uniformly.

The DBA 5000 Series Brake Rotors are designed for the serious driver. These 2-piece ultra-high performance rotors feature aerospace grade materials for added thermal (heat) protection to you vehicle's wheel bearings.

*DBA 5000 Series rotors are available in slotted or drilled and slotted, and with black or gold hats*




Goodridge G-Stop Stainless Steel Brake Lines

Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications.

The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal chatter.

All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow.

*Features*
* Performance Enhancement & Safety Improvement
* Eliminates Sponginess Under Braking
* Increases Braking Efficiency
* Abrasion and Corossion Resistent




Motul RBF600 Brake Fluid

595°F dry - 421°F wet

Extreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. The package is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point helps prevent vapor lock and brake fade during hard use, with excellent recovery time.


PM or call us for current pricing. Mention that you saw this ad and receive the exclusive EvoM pricing and free shipping!

631-223-8090 (Ask for Chris)