CF pillars and S2k Shorty (Pics)
those look pretty sweet!!! if you dont mind me askin how much did you pay for the vent shades and who did you get them from. other than that, power on with the new visual mod.
Thread Starter
Evolved Member
iTrader: (15)
Joined: Aug 2004
Posts: 827
Likes: 0
From: Santa Monica, Ca, United States
well the VISOR is OEM from Mitsu, its about a hundred, but I think you can them for cheaper at mitsubishiparts.com.
The cuts were a bit time consuming using Cardoard cut outs as templates before I actually cut the CF pillars......I think it looks pretty good. and the S2k and antenna work just like the stock one, but look way better.
Now I need a Vortex Generator...
The cuts were a bit time consuming using Cardoard cut outs as templates before I actually cut the CF pillars......I think it looks pretty good. and the S2k and antenna work just like the stock one, but look way better.
Now I need a Vortex Generator...
Trending Topics
Evolved Member
Joined: Dec 2003
Posts: 1,194
Likes: 0
From: malaysia - south east asia
mr007,
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
Thread Starter
Evolved Member
iTrader: (15)
Joined: Aug 2004
Posts: 827
Likes: 0
From: Santa Monica, Ca, United States
Originally Posted by NoTiGuY
mr007,
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
Thanks NOtiGuY,
Cutting them was not to hard. I used a dremal with a Circlie cutting blade(stnadard) and it cut perfect.....I used a cone shaped grinder to smoth out the corners.......I also created templates using cardboard, so that I would get perfect fit...and as You can say it did not come out to shabby.
I got the pillars off of EBAY......for about 50buck with shipping....alot cheaper than the VARIS ones, and there was no cracking....
kim, the pics should work now....not sure what happended, as I use cardomain as my host site...
I will try and get some further side shots later and post...
you don't by any chance have any more pics a little farther back of the visors? I was thinkn of getting them but i just need a final desicion
Thread Starter
Evolved Member
iTrader: (15)
Joined: Aug 2004
Posts: 827
Likes: 0
From: Santa Monica, Ca, United States
here are som pics from far away for people who wanted to see the visors, but this was way before I started REALLY modding the car......hoe it helps in your decision
Evolved Member
Joined: Dec 2003
Posts: 1,194
Likes: 0
From: malaysia - south east asia
Originally Posted by mr0072003
\\
Thanks NOtiGuY,
Cutting them was not to hard. I used a dremal with a Circlie cutting blade(stnadard) and it cut perfect.....I used a cone shaped grinder to smoth out the corners.......I also created templates using cardboard, so that I would get perfect fit...and as You can say it did not come out to shabby.
I got the pillars off of EBAY......for about 50buck with shipping....alot cheaper than the VARIS ones, and there was no cracking....
kim, the pics should work now....not sure what happended, as I use cardomain as my host site...
I will try and get some further side shots later and post...
Thanks NOtiGuY,
Cutting them was not to hard. I used a dremal with a Circlie cutting blade(stnadard) and it cut perfect.....I used a cone shaped grinder to smoth out the corners.......I also created templates using cardboard, so that I would get perfect fit...and as You can say it did not come out to shabby.
I got the pillars off of EBAY......for about 50buck with shipping....alot cheaper than the VARIS ones, and there was no cracking....
kim, the pics should work now....not sure what happended, as I use cardomain as my host site...
I will try and get some further side shots later and post...
thanks dude... do you mind giving me the url of the ebay where u got it? i wouldnt mind getting my hands on them...
