Just hade some time to upload my pics of my most recent mods... as alwyas feed back is welcomed..






Evolving Member
those look pretty sweet!!! if you dont mind me askin how much did you pay for the vent shades and who did you get them from. other than that, power on with the new visual mod.
well the VISOR is OEM from Mitsu, its about a hundred, but I think you can them for cheaper at mitsubishiparts.com.
The cuts were a bit time consuming using Cardoard cut outs as templates before I actually cut the CF pillars......I think it looks pretty good. and the S2k and antenna work just like the stock one, but look way better.
Now I need a Vortex Generator...
The cuts were a bit time consuming using Cardoard cut outs as templates before I actually cut the CF pillars......I think it looks pretty good. and the S2k and antenna work just like the stock one, but look way better.
Now I need a Vortex Generator...
Evolved Member
Sweet man. Please post up some side shots of your car with the whole car showing.
Evolved Member
Quote:
Originally Posted by Genesis8
It seems like your Atenna got vortex generator on it....LOL...
I was just thinking that too

Evolved Member
mr007,
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
Quote:
nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
\\Originally Posted by NoTiGuY
mr007,nice nice nice... was it hard to cut the shape of the visor out? i had a friend who did it on his varis cf pillars and the clear coat/resin started crackin.....
where did you get urs and if you dont mind, whats the price you paid for?
secondly, do you have pics of your interior dash?
Thanks NOtiGuY,
Cutting them was not to hard. I used a dremal with a Circlie cutting blade(stnadard) and it cut perfect.....I used a cone shaped grinder to smoth out the corners.......I also created templates using cardboard, so that I would get perfect fit...and as You can say it did not come out to shabby.
I got the pillars off of EBAY......for about 50buck with shipping....alot cheaper than the VARIS ones, and there was no cracking....
kim, the pics should work now....not sure what happended, as I use cardomain as my host site...
I will try and get some further side shots later and post...
Newbie
looks good man
you don't by any chance have any more pics a little farther back of the visors? I was thinkn of getting them but i just need a final desicion 
Thanx
you don't by any chance have any more pics a little farther back of the visors? I was thinkn of getting them but i just need a final desicion 
Thanx
here are som pics from far away for people who wanted to see the visors, but this was way before I started REALLY modding the car......hoe it helps in your decision


Evolved Member
Quote:
Thanks NOtiGuY,
Cutting them was not to hard. I used a dremal with a Circlie cutting blade(stnadard) and it cut perfect.....I used a cone shaped grinder to smoth out the corners.......I also created templates using cardboard, so that I would get perfect fit...and as You can say it did not come out to shabby.
I got the pillars off of EBAY......for about 50buck with shipping....alot cheaper than the VARIS ones, and there was no cracking....
kim, the pics should work now....not sure what happended, as I use cardomain as my host site...
I will try and get some further side shots later and post...
Originally Posted by mr0072003
\\Thanks NOtiGuY,
Cutting them was not to hard. I used a dremal with a Circlie cutting blade(stnadard) and it cut perfect.....I used a cone shaped grinder to smoth out the corners.......I also created templates using cardboard, so that I would get perfect fit...and as You can say it did not come out to shabby.
I got the pillars off of EBAY......for about 50buck with shipping....alot cheaper than the VARIS ones, and there was no cracking....
kim, the pics should work now....not sure what happended, as I use cardomain as my host site...
I will try and get some further side shots later and post...
thanks dude... do you mind giving me the url of the ebay where u got it? i wouldnt mind getting my hands on them...