i went wingless for a minute, and i just taped the holes from inside. i know there is someone who makes color matched plugs for the srt-4 maybe i should look him up and see whatz up with that.

 

I traded someone a my trunk and wing for their rs trunk plus they paid me 250 wingless is the ****

 

I just left my holes open. water drains no problem

 

color matched plugs would be awsome!!!

Anyone know where we could get someone to do this for us????

 

I actually made my own plugs and it was not hard. Go to Autozone or where ever and pick up some rubber gromits. The ones I got came with 2 big round ones and two flat round ones so I had to pick up 2 packs ( for the flat ones). I then bought the spray paint that matched my paint code and sprayed down the gromits with a coat or 2 of the paint. Before I put them in I coated the bottom of the gromit with some silicon and placed it in the hole. Works good, the paint just started to crack (4 months later) but thats a really quick spray paint fix (make sure you tape off the area!). All in all it cost me like $15 and the paint actually matches better than the pen i got from the dealer.

 

It cost me $300, done by a body shop. Wing removed, holes welded closed, bondoed, sanded smooth, and trunk lid repainted and clearcoated to match the rest of the car. It came out fairly nice, and I much prefer the look of the car without the wing. I also appreciate the very noticeable reduction in unwanted attention.

 

Anybody using stickers/vinyl where did you find them, also could the guy who painted the grommets post up what the code for the apex silver color is, thanks.

Scorke

 

Just bought a RS trunk lid at the dealer wasnt that bad ,for $300 They will only come white ,which for me i will have too paint mine .. which is the fun part!

 

anyone got pics of theirs painted/plugged?

 

https://www.evolutionm.net/registry/...e.php?vid=3612

There is a pic in my registry... I used clear rubber adhesive feet from Home Depot.

 

it makes the rear of the car look cleaner.

 

i would rather buy a carbon fiber trunk lid than spend the money on getting the hole filled