Big thanks to Rishie @ AutoRnD for the hookup on the Enkei's! Thanks to TireRack for the deal on the 265/35/18 RE01-R's!!!!

 

I love these wheels,they look amazing on gunmetal as well.

 

Yeah That~~

They are amazing and pretty stiff........uh....I mean strong, too...

 

kiiiinda gay

 

i love these rims so much. especially with them being concave

 

I am trying to confirm fitmet on spacers, fender rolling, and the concave/convex look of these rims. I plan to run a 245 R6; which I hear is more like a big 255. Please correct me if misstated below:


NT03+M 18x9.5 +27mm --> This is the 'deep-dish' type look
10-15mm front spacers needed
265 - fit; probably need to roll rear fenders
275 - a lot of rolling and molesting

NT03+M 17 x 9.5 +38 --> This is the FWD basket 'pushed-out' look
255 no issues
275 - rear minor fender rolling

 

Fail!. To purge N2 you should fill, drain, fill again.

 

Can't comment on the 17's as I don't have them.

NT03+M 18x9.5 +27mm --> This is the 'deep-dish' type look
-10mm MINIMUM front spacers needed. I would recommend 12 or 15mm spacer for more caliper clearance.

265/35 - fit, WILL require heaving rolling front and ROLL/PULL on rear.

275/40's - Dont fit unless you cut an inch out of your quarter and fender.

I run the +38 NT03's 18x9.5's... I would recommend getting the +38's because you won't have to destroy your quarters to get them to fit with a 265 size tire. The difference in the face of the wheel (lip/concavity) is not noticeable...if there actually is a difference...I can't tell.

 

here are some pics of an evo VIII i took back in March at a PCA event at VIR

 

^^^ looks great what are the specs?

 

My rig 18x9.5 +27 15mm spacer upfront

 

I know my whip isnt an evo ( i really admire evo's though) but I have nt03+m's on my car...wish mine were concaved like you guys...

 

Perfect wheels. What size tires and does it rub?

 

255/35/18 and a tiny bit of rubbing. The fenders were only mildly rolled and the wheels fit good!

 

^looks totally sick