im going to stick it under the mirror as high as i can, will try to run the cord through the head liner,,, but i have NO CLUE how toget under it,, i hate working on the interior becuz 1 slip and you've got some nasty **** to look at for ever after

any tips?!

 

You can tuck it under the headliner and A piller without even removing a screw! Just stuff the wire underneath and remove the dome light to feed it through the last few inches. It's real easy to do without really any risk. Good luck

 

I mounted my V1 behind the mirror and my remote display is in the dash. I ran the power wires under the headliner and down the a-pillar.

 

tapped into the cigarette lighter

 

What version is that? Where is laser detector on that one? Minie is lower right. That is why I was able to mount it behind the mirror. I like how hidden it is back there. With the black mirrir and detector, it is hard to tell it is there from the outside.

 

dunno. got it like a year and a half ago

 

is it hard to get under the head liner?

 

Nope. Remove the dome light assembly and a-pillar. The run a hanger under the headliner and draw the wire through. Not hard at all. There is also plenty of room on the passenger side to drop the wire down behind the dash toward the ECU to get power.

 

cool, im going to replace my apillar as soon as fireball gets mine shipped to me so i might as well wait till then my kit says to hook into the fuse box,, but if its easyer to drop down by the passenger side maybe i'll try that

dont know much about the car's electrical circuits,, guess its time to learn eh?

 

The fuse box is fine, but I used the ECU power since it was easily accessable with the Fields harness. There is probably plenty of room on the drivers side too. I just haven't looked.

 

Here's mine...Can you see it?

 

How about now?

 

Here's a hint....

 

Ok..it won't let me post the other pic that should be right here...strange.

 

Last picture....