Its never too late to start a "build" thread right? :)
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
So you run 96530706 and literally just did:
and changed "4A0B" to "0009" and that's it? I shall give this a try.
**edit** I tried it, it seems to work great! I have the rear o2 completely unplugged. I'll make sure nothing silly becomes of it over the next week but all seems fine for now.
Code:
<table name="Rear O2 Heater Patch" category="Mods" address="2c62a" type="1D" scaling="Hex16" />
**edit** I tried it, it seems to work great! I have the rear o2 completely unplugged. I'll make sure nothing silly becomes of it over the next week but all seems fine for now.
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
Blacking out my new headlights. Amber removed and green lens mod.
Painting my hella horns green
Painting my hella horns green
Last edited by bnr34rb26dett; Nov 28, 2011 at 02:37 PM.
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
My car is only doing 0.5 bar at the moment. So if I steal all your bits i can diagnose :P
That is an awesome build thread.. The Takata Green wheels look awesome.. you might need to change your seat belt harness to match.. which look sick .. Keep it up and I will stay tuned..
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
good idea! i dont like the flashy seat belts tho...
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
Well it was nice out here in the south. so i decided to detail under my car for once. Being that it came from PA, there was a little bit of rust under the car. every bit of it was dremeled off and painted over with 3m undercoat spray paint. 
Pictures from work in progress
You can also see my dump tube finally. Its doing well so far.
I have also done full detailing of my car. wash, clay bar, polish, wax. spent 12hrs just detailing
Also,
JDM bumper is on its way from Driveline (FINALLY!)
Pictures from work in progress
You can also see my dump tube finally. Its doing well so far.
I have also done full detailing of my car. wash, clay bar, polish, wax. spent 12hrs just detailing
Also,
JDM bumper is on its way from Driveline (FINALLY!)
Last edited by bnr34rb26dett; Dec 11, 2011 at 05:10 PM.
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
thanks!
Yes its missing a bolt. it broke off when i was installing the o2 dump. i have a new OEM dp bolt coming in the mail.
Rear exhaust hanger is zip tied to bring down my JDM exhaust thats currently fitted on my USDM bumper (JDM exhaust was hitting my USDM bumper) I have my JDM bumper coming in the mail right onw
Yep, rear tow hook has been painted red. i should be able to see this with JDM rear
Originally Posted by MitsuJoe
Is your downpipe to O2 housing missing a bolt?
Also whats up with the ZIP ties around the center exhaust hanger?
Also did you paint the rear tow hook red?
Joe
Also whats up with the ZIP ties around the center exhaust hanger?
Also did you paint the rear tow hook red?
Joe
Rear exhaust hanger is zip tied to bring down my JDM exhaust thats currently fitted on my USDM bumper (JDM exhaust was hitting my USDM bumper) I have my JDM bumper coming in the mail right onw
Yep, rear tow hook has been painted red. i should be able to see this with JDM rear
