WW Evo with gold Rims
May 1, 2012, 09:26 PM
#1
Newbie
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: Indiana
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
WW Evo with gold Rims
Thought I'd share a few pictures. I want to buy a few things to fix her up as I just got her but she isn't bad as is.
Thoughts are welcome!
Day I bought it:
Rear lip still on:
Full alcantara interior, I love it!
Added a home-made grill:
18X10 ET 15
Gold tape that serves no purpose:
Thoughts are welcome!
Day I bought it:
Rear lip still on:
Full alcantara interior, I love it!
Added a home-made grill:
18X10 ET 15
Gold tape that serves no purpose:
Last edited by eric6; May 6, 2012 at 09:23 AM.
May 1, 2012, 10:00 PM
#2
Evolved Member
iTrader: (64)
Join Date: Jul 2006
Location: WA Seattle toolanddyedesigns.com
Posts: 745
Likes: 0
Received 1 Like
on
1 Post
Looks pretty good. Are those Moton's?
That tape is actually reflecting heat back towards the engine.
What's done to the car power wise? Looks like it used to be heavily modded and then returned to near stock engine wise to sell??
That tape is actually reflecting heat back towards the engine.
What's done to the car power wise? Looks like it used to be heavily modded and then returned to near stock engine wise to sell??
May 1, 2012, 10:20 PM
#3
Newbie
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: Indiana
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Motons? They are genuine Advans
Yes, I know, but its on the vent so I doubt its really doing anything other then adding a little bling, which was the purpose.
As far as I know, its never been heavily modified. Evo9 turbo, intake, AMS intercooler, 3" TBE, etc. Makes 360 to the wheel at 25 lbs, no dyno just going off what the previous owner said.
Yes, I know, but its on the vent so I doubt its really doing anything other then adding a little bling, which was the purpose.
As far as I know, its never been heavily modified. Evo9 turbo, intake, AMS intercooler, 3" TBE, etc. Makes 360 to the wheel at 25 lbs, no dyno just going off what the previous owner said.
Trending Topics
May 2, 2012, 07:18 AM
#10
Newbie
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: Indiana
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Ya, I love it so far. I was looking for a new DD for awhile now, and I've always loved evos.
There are some issues, main one being rust. I'm trying to kill it with POR15. So far I'm really impressed with the product. I would like an evo9 front bumper but this bumper is starting to grow on me. I don't have a picture with it but the stock side-skirts are back on as well.
I just had it aligned, camber all the way around is between -2 and -2.5 degrees, so yes she has some camber in her. I rub on anything I take too hard so I'm thinking I'll raise it up some.
There are some issues, main one being rust. I'm trying to kill it with POR15. So far I'm really impressed with the product. I would like an evo9 front bumper but this bumper is starting to grow on me. I don't have a picture with it but the stock side-skirts are back on as well.
I just had it aligned, camber all the way around is between -2 and -2.5 degrees, so yes she has some camber in her. I rub on anything I take too hard so I'm thinking I'll raise it up some.
May 3, 2012, 03:57 PM
#15
Newbie
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: Indiana
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I do too! I just need to find a way to fit some wider rubber on there without it looking ugly and rubbing. It already rubs if I take a turn semi-aggressively =/.