Wheel Fitment PICTURES ONLY Thread
#301
Wheels: Enkei RPF1, 18x10 +38
Spacers: 20mm spacers up front, 5mm spacers in rear
Tires: Bridgestone RE050, 265/35/18
Suspension: Stance Coilovers
Fender work: removed front fender liners
Barely rubs at full lock at the inner most part of where the end of the side skirts sit inside the front wheel wells. Trying to fix.
Spacers: 20mm spacers up front, 5mm spacers in rear
Tires: Bridgestone RE050, 265/35/18
Suspension: Stance Coilovers
Fender work: removed front fender liners
Barely rubs at full lock at the inner most part of where the end of the side skirts sit inside the front wheel wells. Trying to fix.
#304
OZ Superleggera 17x8 et35 & 8mm spacers to fit on Brembo with 215/45R17, slight rub (splash shields)
Tecnomagnesio TM Sport 17x7 ET38 w/o Brembo
OEM Evo6 17x7,5 et38 - best fit on E4 with Brembo
Tecnomagnesio TM Sport 17x7 ET38 w/o Brembo
OEM Evo6 17x7,5 et38 - best fit on E4 with Brembo
The following users liked this post:
kraven9 (Feb 19, 2017)
#306
#308
EvoM Staff Alumni
iTrader: (3)
#311
#313
EvoM Staff Alumni
iTrader: (3)
Tough to get someone who maybe running this spec to see this post. The +18 would very difficult to fit correctly in the rear. Up front you can make work w/out too much trouble.
Would need a very tight rear roll w/a fender pull, plus the bumper bolt relocate to make this work
Its doable but not recommended
Would need a very tight rear roll w/a fender pull, plus the bumper bolt relocate to make this work
Its doable but not recommended
#315
18x10.5 +22 10mm wheel spacer in front 245/35/18
Fortune auto coilovers
Front rolled
Rear rolled and pulled
Camber -2.5 front -3.5 rear
Fortune auto coilovers
Front rolled
Rear rolled and pulled
Camber -2.5 front -3.5 rear
Last edited by Akorallygood; Oct 3, 2016 at 03:10 PM.