Alignment Specs
ovenmitt your new specs look good. don't worry about the -1.5 -1.3 in front. when you sit in your car the right side will go more negative by about .2-.3 so both sides will even out.
also I would zero the toe out. at least in the front. but drive it around see how you like it.
also I would zero the toe out. at least in the front. but drive it around see how you like it.
Originally Posted by ovenmit331
ahhhh that explains it...
and scottybob, whatcha think about my new specs?
and scottybob, whatcha think about my new specs?
Originally Posted by Scottybob
IMO, I would not recommend -1.5 rear camber untill you get up to about -3.0 front.
If the camber bolts are correct, then that is about all you are going to get with the stock stuff. They only have basicly two ways they can go into the tabs on the struts, so if you are looking for more negative camber you are going to have to use some aftermarket solution.
If the camber bolts are correct, then that is about all you are going to get with the stock stuff. They only have basicly two ways they can go into the tabs on the struts, so if you are looking for more negative camber you are going to have to use some aftermarket solution.
