or you could add voltex rear wheel arches so everythig fits no problem. do a search and you'll find what your looking for.

 

haha, i think u responded while i was typing.

 

they may be stock in the picture but simply add GarageHRS or chargespeed front wide fenders and you shouldnt have a problem.

 

I know with GarageHRS fender, i will be able to fit 9.5. my friend has that set-up now. But i really want to know what the hell they did to fit the 17x9.5+12 with stock fender. maybe it can bring me ideas to another direction.

 

you'd have to back space it actually. the popular term is not concave but gtr face. the volk wheel you want is the te37 in either 18 or 17 x 9 in +22. i think you can stretch the fenders to include the wheel but... it's hard.

 

notice however that this is staggered setup...

the gramlight 57s in +22 is also gtr face.

the gramlight 57f in 9.5 +38 and 8.5 +30 is slightly gtr face

the 5zigen gn+ 18x8.5 +33 is slightly gtr face.

 

I WANT TO KNOW EXACTLY WHAT THESE ARE AS FAR AS WIDTH AND OFFSET. SOMEONE SAID 18X9 WITH +31MM BUT IS THAT DEFINITE???

 

Call Vishnu, that's their Shop car in the C&D event...

 

that looks right. 18x9 +31. if anything look at the tanabe ssr thread and then see if they make the ssr (either of them) in that size.

http://www.rd-tanabe.com/ssr/collect...pec/index.html

i checked and they don't... but maybe you can find something in that vicinity.

 

the red on is sweet!

 

For the concave wheels...the ones that come to mind are...

5Zigen FN01RC 17x10 +12


or...
TE37 LOW OFFSET

For all the evo's that were posted with sunken faces, they were all running either a stretched tire (example - 18x9 with 215's) or they had fender upgrades or pulled.

Hope that helps!
Chris

 

https://www.evolutionm.net/forums/sh...ight=deep+17x9

deepest i've seen on an evo.

 

Does any one know where to find pictures of 18" rims with these low off-sets. that would be a great reference tool for me and others looking to do this.

also if i ordered a 18x9.5" rim with a +22 off-set would it concave as much as the 17" rims are?

 

I would try to find the TE-37 cup's. They might make them for a EVO.. Good Luck..

 

I would think the Enkei RPF1 also, I have them on my g35 and the rear ones are "concave" but they are also 19x10, fronts are not concave.