Hello everybody,

I bought Megan Coilover today (they should arrive next week).

I was told that to have a proper alignment done to the car I need to give the shop all the settings. I don't know where to get them, but I thought that someone on EvoM might help.

I'm shooting to get car lowered a little bit, I had Tein S-tech springs and 2" drop in the front was too much, thinking about an inch or so. I also want to get them smoother for the street than the stock suspension was. I'm planning on taking the car to the track, but only couple times, so I will be mainly driving it on the street (Ohio roads suck). Can anyone help me here please?

Thanks

 

If it's going to be primarily street driven just do something in the range of -1.5 to -1.8 front and -.8 in the rear with 0 toe all around. If you are going to track it or use r-comps you should go at least -2.5 front and -1.2 rear.

 

That's what I was thinking, primarily street, I might go to the track once or twice. Even if I go it would be my first time at the track

 

Anybody else? Please leave some input. I know this has been covered and covered often, but searching has not answered my question...

Everything is basicly for track and stiffer settings, but I was looking for a smooth daily driver too.

 

bump

 

Well, I have Megan and they are great. Love them + way better than stock. I'll post specs later on tonight. I came with very conservative setup for DD, I'll post more tonight

 

I just ordered the megan street coilovers. I'm glad I found where to set them to

 

and where did you find this...

 

lol, and way to liven up a year old thread

 

thanks I appreciate it...I'm VERY good at it