The Official Wide Tire Thread
Mar 14, 2013, 08:17 AM
#392
The bold part is where you're going to fail. All these wheels are perfect fitment for the Evo in the rear. You need a 10-20mm spacer depending on the wheel to get clearance for the Brembo calipers up front.
Spacers aren't bad. I run a 22mm spacer and I'm not retarded... I'm an Engineer. You'll need to run ARP extended studs and do it up right. You're going to spend another 300 dollars for lugnuts, spacers, and ARP studs.
Spacers aren't bad. I run a 22mm spacer and I'm not retarded... I'm an Engineer. You'll need to run ARP extended studs and do it up right. You're going to spend another 300 dollars for lugnuts, spacers, and ARP studs.
that is 7MM of space there... the 17x9.5 +35 cuts that out but i might have to run a 3mm spacer on fronts... which is perfectly fine...
and yeah i already have the studs etc... as you can see in the photo..
Mar 14, 2013, 09:44 AM
#393
Just make sure you run hub centric spacers.
I am using actually stock studs and FIC Racing 20mm spacers that are hub centric and bolt to the hub and then wheel bolt to the spacer. very reliable and safe. But they are pricey about 190$ per set.
My car is being race all the time and never had any issues. Rauh Welt uses same type of spacers on their 911's with up to I think 4" thickness. NO problems.
I am using actually stock studs and FIC Racing 20mm spacers that are hub centric and bolt to the hub and then wheel bolt to the spacer. very reliable and safe. But they are pricey about 190$ per set.
My car is being race all the time and never had any issues. Rauh Welt uses same type of spacers on their 911's with up to I think 4" thickness. NO problems.
Mar 14, 2013, 07:28 PM
#395
Never hurts to verify if any one is actually running them and have first hand... I'm pretty sure this is a solid fitment... but until i get one and mount rubber and put on the car I'm not 100%
i'm sure in the world of EVO 8/9's out there some one has a 17x9.5 CE28N +35 on their car... and could answer... maybe they see this post
to verify fitment
Mar 14, 2013, 07:54 PM
#396
Never hurts to verify if any one is actually running them and have first hand... I'm pretty sure this is a solid fitment... but until i get one and mount rubber and put on the car I'm not 100%
i'm sure in the world of EVO 8/9's out there some one has a 17x9.5 CE28N +35 on their car... and could answer... maybe they see this post to verify fitment
i'm sure in the world of EVO 8/9's out there some one has a 17x9.5 CE28N +35 on their car... and could answer... maybe they see this post
to verify fitmentContact the member & ask him, its post no. 113
https://www.evolutionm.net/forums/ev...-thread-8.html
Mar 14, 2013, 10:55 PM
#397
Did you by chance see this post CE28N 17x9.5 (no offset given)
Contact the member & ask him, its post no. 113
https://www.evolutionm.net/forums/ev...-thread-8.html
Contact the member & ask him, its post no. 113
https://www.evolutionm.net/forums/ev...-thread-8.html
I just read that and i PM'd him... hopefully gets back...
Should be ready to go in about 4 weeks!
