Tire / Wheel Fitment Questions
#1231
Newbie
iTrader: (5)
Join Date: Oct 2007
Location: York, SC.
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Help please, spacer size needed
Hey guys, i picked a set of rota mc's, i know i know, they're rota's but hey, they look nice!! but they don't clear my front brakes, i was wondering if anyone else has ran a similar set up 18x8 +35 offset and wat size spacer was used to clear the front brakes.
Thanks, any help or advice would be greatly appreciated
Thanks, any help or advice would be greatly appreciated
#1232
Evolved Member
iTrader: (33)
go to the hardware store, grab some 1/2" washers and stack them on a couple studs until it clears. measure the stack and go from there.
*disclaimer* do not drive with the washers between the wheel and hub! you may also need longer studs with spacers. you need at least 1/2" of thread engagement.
*disclaimer* do not drive with the washers between the wheel and hub! you may also need longer studs with spacers. you need at least 1/2" of thread engagement.
#1233
^his idea is pretty good. don't drive with the washers one though! haha
i don't think you'll need very big spacers though....extended bolts will probably be needed.
i don't think you'll need very big spacers though....extended bolts will probably be needed.
#1237
Account Disabled
iTrader: (19)
BC Inverted Coilovers
EvoDave fender mod
Wheel spacers
Extended ARP Wheel studs
Megan rear lower control arms and camber adjustment
Pulled, stretched and rolled stock IX fenders.
18x10.5+30 Enkei NT03+M 265 Hankook Ventus Evo V12
Teaser pic, I pick the car up tomorrow hopefully...
EvoDave fender mod
Wheel spacers
Extended ARP Wheel studs
Megan rear lower control arms and camber adjustment
Pulled, stretched and rolled stock IX fenders.
18x10.5+30 Enkei NT03+M 265 Hankook Ventus Evo V12
Teaser pic, I pick the car up tomorrow hopefully...
#1240
Evolved Member
iTrader: (8)
#1241
Account Disabled
iTrader: (5)
Join Date: Jul 2009
Location: g-lake
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
I run advan Rs-d w 18x10 et 25/or22 and there on my ix and I only have issues at full lock and on the rears b4 I got roll m pull they ate my rear tires. Now they look sooo good
Oh ye on 255/40/18
Illinois users ( touge factory) great shop to get all this work done and a fair price!
Oh ye on 255/40/18
Illinois users ( touge factory) great shop to get all this work done and a fair price!
#1244
Evolving Member
iTrader: (27)
Join Date: Sep 2008
Location: Tucson, AZ
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
18X9.5 +28 wheels with 245/35/18's
If anyone is running this setup, how is it and does anyone have pics? Will I need spacers or any fender mods? I have a set of Volk CE28N's in this size and just got a set of 245/35/18 Toyo Proxy T1R's and am curious before I go tearing the car apart.
Also while Im at it, Im getting extended lugs and stugs. Whats the thread pitch? 12X1.25 or 12X1.5? Any recommended length of ARP stud to get or is there only one option?
Also while Im at it, Im getting extended lugs and stugs. Whats the thread pitch? 12X1.25 or 12X1.5? Any recommended length of ARP stud to get or is there only one option?