Evo VIII magnecor spark plug wires IN STOCK but only a few sets so HURRY !
Oct 14, 2003, 11:58 AM
#1
Evolved Member
Thread Starter
iTrader: (38)
Join Date: Dec 2002
Location: wisconsin
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Evo VIII magnecor spark plug wires IN STOCK but only a few sets so HURRY !
Just got two sets of 8mm (blue) and 8.5mm (red) in stock today. I will cut right to the chase with the pricing and info:
blue 8mm - $74 shipped
red 8.5mm - $95 shipped
These will make a great addition for those modding their Evos. It brakes down like this , the blue (8mm) is fine for stock with minimal mods like intake , exhaust, etc. but I would recommend the red (8.5mm) to those who are doing more like E- Manage, FMIC and are just looking to get the most out of your Evo. The stock plugs are good but they are ONLY stock plugs. Here is some info from Magnecor
Magnecor 8mm Electrosports 80 Ignition Cables
Original equipment replacement. Designed to improve original ignition system performance on street vehicles using either electronic engine management systems or carburetors. Conductor provides excellent RFI and EMI suppression to permanently eliminate the typical performance and fuel-wasting spark energy deterioration of OE and aftermarket carbon conductor wires. Also overcomes performance problems associated with poorly suppressed aftermarket spiral conductor wires on both modern and older engines. The conventional style insulating jacket consists of high dielectric strength silicone rubber insulation, fiberglass reinforcing braiding and a high temperature, high tear strength silicone rubber outer jacket. The flexibility and ruggedness of the cable allows it to be fitted into original 7mm cable holders. Ideal for use on heat-generating LPG (propane) gas conversion engines.
KV85 Competition (8.5mm)
These 8.5mm Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources. The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1,000 degrees F (540 degrees C) for short burst 3 minutes.
Thank you very much and feel free to pm or email me at sales@drcimports.net
Please call me at 920-723-1978 only to order. I can handle questions or concerns online.
Dustin
blue 8mm - $74 shipped
red 8.5mm - $95 shipped
These will make a great addition for those modding their Evos. It brakes down like this , the blue (8mm) is fine for stock with minimal mods like intake , exhaust, etc. but I would recommend the red (8.5mm) to those who are doing more like E- Manage, FMIC and are just looking to get the most out of your Evo. The stock plugs are good but they are ONLY stock plugs. Here is some info from Magnecor
Magnecor 8mm Electrosports 80 Ignition Cables
Original equipment replacement. Designed to improve original ignition system performance on street vehicles using either electronic engine management systems or carburetors. Conductor provides excellent RFI and EMI suppression to permanently eliminate the typical performance and fuel-wasting spark energy deterioration of OE and aftermarket carbon conductor wires. Also overcomes performance problems associated with poorly suppressed aftermarket spiral conductor wires on both modern and older engines. The conventional style insulating jacket consists of high dielectric strength silicone rubber insulation, fiberglass reinforcing braiding and a high temperature, high tear strength silicone rubber outer jacket. The flexibility and ruggedness of the cable allows it to be fitted into original 7mm cable holders. Ideal for use on heat-generating LPG (propane) gas conversion engines.
KV85 Competition (8.5mm)
These 8.5mm Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources. The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1,000 degrees F (540 degrees C) for short burst 3 minutes.
Thank you very much and feel free to pm or email me at sales@drcimports.net
Please call me at 920-723-1978 only to order. I can handle questions or concerns online.
Dustin
Trending Topics
Oct 15, 2003, 12:14 PM
#8
Evolved Member
Thread Starter
iTrader: (38)
Join Date: Dec 2002
Location: wisconsin
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Update:
One set of 8.5mm being held for Chris in HB (Hunington Beach is is really in North VA. now) hahaha j/k Chris ! You have to change your name now =P
Only one set of 8.5mm left (a few interested in buying) and two sets of 8mm
That about sums it up !
One set of 8.5mm being held for Chris in HB (Hunington Beach is is really in North VA. now) hahaha j/k Chris ! You have to change your name now =P
Only one set of 8.5mm left (a few interested in buying) and two sets of 8mm
That about sums it up !
Oct 15, 2003, 12:16 PM
#9
Evolved Member
Thread Starter
iTrader: (38)
Join Date: Dec 2002
Location: wisconsin
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 5StarSuzuki
How much are the R100s out of curiosity?
How much are the R100s out of curiosity?
Last edited by DRC Imports; Oct 15, 2003 at 12:19 PM.
Oct 15, 2003, 12:18 PM
#10
Evolved Member
Thread Starter
iTrader: (38)
Join Date: Dec 2002
Location: wisconsin
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Deceit
Dustin,
How do they perform? Any considerable improvements?
Dustin,
How do they perform? Any considerable improvements?
Oct 21, 2003, 11:58 AM
#11
Are the 8.5mm Magnecores still avail?
Have you test fit them? Any fitment issues? I had a set on my built n/a GSR which were awesome, but they had a little trouble fitting under the spark plug cover.
Can I pay with paypal?
Thanks,
FB
Have you test fit them? Any fitment issues? I had a set on my built n/a GSR which were awesome, but they had a little trouble fitting under the spark plug cover.
Can I pay with paypal?
Thanks,
FB
Oct 21, 2003, 12:52 PM
#12
Evolved Member
Thread Starter
iTrader: (38)
Join Date: Dec 2002
Location: wisconsin
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by berkel
Are the 8.5mm Magnecores still avail?
Have you test fit them? Any fitment issues? I had a set on my built n/a GSR which were awesome, but they had a little trouble fitting under the spark plug cover.
Can I pay with paypal?
Thanks,
FB
Are the 8.5mm Magnecores still avail?
Have you test fit them? Any fitment issues? I had a set on my built n/a GSR which were awesome, but they had a little trouble fitting under the spark plug cover.
Can I pay with paypal?
Thanks,
FB
There are NO fitment isues. I have test fitted two sets successfully !
Dustin
Oct 21, 2003, 02:14 PM
#14
Hey Dustin,
I saw in another post of yours that you have Iridium densos? I would like to replace my plugs at 10k as well. Do you have fitment for the EVO?
I believe stock are NGK, but I can't find them online. sparkplugs.com says only Mitsu dealers will carry them. Neway, please post what you got.
<edit>
also wanted to confirm you got my paypal.
</edit>
Thanks,
FB
I saw in another post of yours that you have Iridium densos? I would like to replace my plugs at 10k as well. Do you have fitment for the EVO?
I believe stock are NGK, but I can't find them online. sparkplugs.com says only Mitsu dealers will carry them. Neway, please post what you got.
<edit>
also wanted to confirm you got my paypal.
</edit>
Thanks,
FB
Last edited by berkel; Oct 21, 2003 at 02:17 PM.
Oct 21, 2003, 02:20 PM
#15
Evolved Member
Thread Starter
iTrader: (38)
Join Date: Dec 2002
Location: wisconsin
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Chris in HB
Dustin, where are the plug wires??
Dustin, where are the plug wires??
Thanks Chris !
Dustin