Gauges on F700bt
#1
Newbie
Thread Starter
Join Date: Aug 2009
Location: Chicago
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Gauges on F700bt
Hi everyone,
I have a Pioneer F700bt, and was wondering if anyone knew of a way to have my gauges show up on it...mostly wideband and boost. This is a longer term project that I would like to do, but was wondering if its at all doable. Any other gauge setups available?
thanks!
I have a Pioneer F700bt, and was wondering if anyone knew of a way to have my gauges show up on it...mostly wideband and boost. This is a longer term project that I would like to do, but was wondering if its at all doable. Any other gauge setups available?
thanks!
#4
Newbie
Thread Starter
Join Date: Aug 2009
Location: Chicago
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
i'm somewhat active on avic411, but wasn't able to find anything like this. There is 1 thread though that is promising: http://avic411.com/forum/viewtopic.php?f=34&t=24459
Was hoping anyone in the evo community would be able to suggest something.
thanks!
Was hoping anyone in the evo community would be able to suggest something.
thanks!
#5
have you looked into the blitz v rit data station? http://www.blitzperformancesales.com...s/r-vitds.html
i think it just connects to the aux input.
i want to run software guages through a nav screen as well and i have been doing some research. the other option is running a magden m.1 which is essentially the same thing. but magden stopped making their units so finding new ones is going to be really difficult.
another option i have seen is to run a carpc and use dashcommand software which allows you to run custom skins and choose which guages color layout etc.
but using a car pc is more involving since you have to deal with pc boot times as well as running a powersupply that will handle the load of ignition during startups.
and finally the last option i have seen is either the ark mfd or the greddy informeter touch both plug directly into obdII port and come with lcd displays which you can mount anywhere you see fit.
i think it just connects to the aux input.
i want to run software guages through a nav screen as well and i have been doing some research. the other option is running a magden m.1 which is essentially the same thing. but magden stopped making their units so finding new ones is going to be really difficult.
another option i have seen is to run a carpc and use dashcommand software which allows you to run custom skins and choose which guages color layout etc.
but using a car pc is more involving since you have to deal with pc boot times as well as running a powersupply that will handle the load of ignition during startups.
and finally the last option i have seen is either the ark mfd or the greddy informeter touch both plug directly into obdII port and come with lcd displays which you can mount anywhere you see fit.
Thread
Thread Starter
Forum
Replies
Last Post
JukEboXAuDiO
09+ Ralliart How-To/Installations
3
Nov 25, 2013 07:53 PM
markpaco
Evo X Electrical / Audio / Security
2
Dec 6, 2008 06:19 AM
Parikh1234
Evo X Electrical / Audio / Security
13
Jun 10, 2008 07:08 PM