OEM Nav, aftermarket backup camera, horizontal rippling?
Thread Starter
Evolving Member
Joined: Mar 2011
Posts: 128
Likes: 1
From: California
OEM Nav, aftermarket backup camera, horizontal rippling?
Hey guys,
I recently had a backup camera installed in my Evo. I'm using the OEM Nav, with an adapter cable bought from a member here. I went with the Boyo VTL375 as my backup camera. When the car is off, and I enter the camera setup via the maintenance menu, the picture is fine and has minimal noise. However, when I start the car, the picture is full of horizontal rippling. They've tried multiple brands of cameras and the rippling is still there. Anyone have an idea what might be causing this? I've contacted the seller of the cable. Seems like it might be a shielding issue? Any ideas appreciated. Thanks!
I recently had a backup camera installed in my Evo. I'm using the OEM Nav, with an adapter cable bought from a member here. I went with the Boyo VTL375 as my backup camera. When the car is off, and I enter the camera setup via the maintenance menu, the picture is fine and has minimal noise. However, when I start the car, the picture is full of horizontal rippling. They've tried multiple brands of cameras and the rippling is still there. Anyone have an idea what might be causing this? I've contacted the seller of the cable. Seems like it might be a shielding issue? Any ideas appreciated. Thanks!
Thread Starter
Evolving Member
Joined: Mar 2011
Posts: 128
Likes: 1
From: California
Hey guys,
I recently had a backup camera installed in my Evo. I'm using the OEM Nav, with an adapter cable bought from a member here. I went with the Boyo VTL375 as my backup camera. When the car is off, and I enter the camera setup via the maintenance menu, the picture is fine and has minimal noise. However, when I start the car, the picture is full of horizontal rippling. They've tried multiple brands of cameras and the rippling is still there. Anyone have an idea what might be causing this? I've contacted the seller of the cable. Seems like it might be a shielding issue? Any ideas appreciated. Thanks!
I recently had a backup camera installed in my Evo. I'm using the OEM Nav, with an adapter cable bought from a member here. I went with the Boyo VTL375 as my backup camera. When the car is off, and I enter the camera setup via the maintenance menu, the picture is fine and has minimal noise. However, when I start the car, the picture is full of horizontal rippling. They've tried multiple brands of cameras and the rippling is still there. Anyone have an idea what might be causing this? I've contacted the seller of the cable. Seems like it might be a shielding issue? Any ideas appreciated. Thanks!
http://cloudnoise.uw.hu/msi_monitorhiba02_kis.jpg
Thread
Thread Starter
Forum
Replies
Last Post
dcevox
Evo X Electrical / Audio / Security
7
Apr 17, 2018 02:09 PM
giumela
Evo X Electrical / Audio / Security
293
Aug 22, 2017 08:29 AM
L0lboubou
Mitsubishi Vehicles (Airtrek / Outlander)
1
May 29, 2015 06:16 AM
