How does the EVO x react to increasing boost?
Oct 26, 2008, 07:35 PM
#17
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Oct 2008
Location: West Palm Beach & Canada
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
No check engine lights been running the current set up for the past 1800 miles no problems what so ever. Just came back from a 350 mile trip and no problems. I went up 1500 feet above sea level with 0 problems so I am willing to say that it works pretty well. Just waiting for a good few days off and I am going to try to get down to Ivey for a tune.
Looks like I may just be sticking to the standard bolts on's with my MR. Mainly because there is only 1 AWD dyno where I am (calgary AB) Canada and I dont think they know EVO's very well. So tuning would have to be all on me, and I dont think i trust my abilitys that much. Building engines from a small 2.4L 4cyl putting out 400hp to a 3.8L Buick GNX motor or a LS7 Z06 putting out 800+hp sure. suspension set ups not a problem..... but tunning I will pass on, I leave that to people who know what they are doing
Oct 28, 2008, 07:22 PM
#22
What are you currently running on your MR?
Looks like I may just be sticking to the standard bolts on's with my MR. Mainly because there is only 1 AWD dyno where I am (calgary AB) Canada and I dont think they know EVO's very well. So tuning would have to be all on me, and I dont think i trust my abilitys that much. Building engines from a small 2.4L 4cyl putting out 400hp to a 3.8L Buick GNX motor or a LS7 Z06 putting out 800+hp sure. suspension set ups not a problem..... but tunning I will pass on, I leave that to people who know what they are doing
Looks like I may just be sticking to the standard bolts on's with my MR. Mainly because there is only 1 AWD dyno where I am (calgary AB) Canada and I dont think they know EVO's very well. So tuning would have to be all on me, and I dont think i trust my abilitys that much. Building engines from a small 2.4L 4cyl putting out 400hp to a 3.8L Buick GNX motor or a LS7 Z06 putting out 800+hp sure. suspension set ups not a problem..... but tunning I will pass on, I leave that to people who know what they are doing
Oct 28, 2008, 08:57 PM
#23
Evolved Member
iTrader: (6)
Join Date: Oct 2006
Location: Arlington Va
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
Not units that regular joe customer ordered. You stated yourself you need to verify real world results and repeatability.
IMO TTP is a few weeks/months away from a successful launch.
You and I both know that if you release that you put yourself in a VERY VERY tough position by claiming 107whp with just a MBC and a piggyback. If you dont have repeatability you are in for a tough time.
I can see it now.. " i ordered my zchip and only got 50whp when i was told 107whp!"
IMO TTP is a few weeks/months away from a successful launch.
You and I both know that if you release that you put yourself in a VERY VERY tough position by claiming 107whp with just a MBC and a piggyback. If you dont have repeatability you are in for a tough time.
I can see it now.. " i ordered my zchip and only got 50whp when i was told 107whp!"
Oct 28, 2008, 10:21 PM
#24
We have not advertised that every user would achieve 107whp.
Our unit has been customized for our vehicle.
With an end user software and hardware interface user can both use their tuner map, as well as custom tune or make adjustments themselves in addition to our tuner mapping.
As of tommorrow morning, first batch of ZChips are able to be purchased.
Our unit has been customized for our vehicle.
With an end user software and hardware interface user can both use their tuner map, as well as custom tune or make adjustments themselves in addition to our tuner mapping.
As of tommorrow morning, first batch of ZChips are able to be purchased.
Oct 28, 2008, 10:43 PM
#26
Evolved Member
iTrader: (1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
We have not advertised that every user would achieve 107whp.
Our unit has been customized for our vehicle.
With an end user software and hardware interface user can both use their tuner map, as well as custom tune or make adjustments themselves in addition to our tuner mapping.
As of tommorrow morning, first batch of ZChips are able to be purchased.
Our unit has been customized for our vehicle.
With an end user software and hardware interface user can both use their tuner map, as well as custom tune or make adjustments themselves in addition to our tuner mapping.
As of tommorrow morning, first batch of ZChips are able to be purchased.
