Notices
Evo X Engine Management / Tuning Forums Discuss the major engine management systems.

TephraMODs for the X

Thread Tools
 
Search this Thread
 
Old May 20, 2010 | 08:10 PM
  #331  
tephra's Avatar
Thread Starter
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
well I think I am going to scrap the TPSCUTonKnock feature

a) it's hard to implement 100%, due to the overly complicated nature of the drive-by-wire system
b) due to the hard nature of the cut I feel scared to put my foot down

I figure if people set their knockcel properly, then any high knock they get should at least get them to check their car/tune out...
Reply
Old May 20, 2010 | 09:02 PM
  #332  
derekste's Avatar
Evolved Member
iTrader: (9)
 
Joined: Nov 2006
Posts: 818
Likes: 0
From: Aurora, IL
Originally Posted by tephra
well I think I am going to scrap the TPSCUTonKnock feature

a) it's hard to implement 100%, due to the overly complicated nature of the drive-by-wire system
b) due to the hard nature of the cut I feel scared to put my foot down

I figure if people set their knockcel properly, then any high knock they get should at least get them to check their car/tune out...
to this.

we spend so much time removing other safety features, why build another one in (especially if it is hard to implement).
Reply
Old May 20, 2010 | 10:50 PM
  #333  
tephra's Avatar
Thread Starter
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
I need a couple of testers for the 2008 USDM MR ROM

it's preferably if they have access to an ECU Bench - just incase
Reply
Old May 20, 2010 | 11:19 PM
  #334  
smanders's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2002
Posts: 273
Likes: 0
From: Raleigh, NC
Originally Posted by tephra
I need a couple of testers for the 2008 USDM MR ROM

it's preferably if they have access to an ECU Bench - just incase
I'm in. Send it my way ;-). The starter of the "How to Bench the ECU" lives in my town. Let's hope that's not a factor.

Thanks!

smanders
Reply
Old May 21, 2010 | 12:34 AM
  #335  
migs647's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (19)
 
Joined: May 2007
Posts: 5,043
Likes: 62
From: Portland
Originally Posted by tephra
I need a couple of testers for the 2008 USDM MR ROM

it's preferably if they have access to an ECU Bench - just incase
If JohnBradley will install it in my car, I'm game. Want me to ask?
Reply
Old May 21, 2010 | 12:39 AM
  #336  
tephra's Avatar
Thread Starter
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
well I need a series of tests done to make sure everything is working right...

so its preferable if the enduser is capable of flashing etc
Reply
Old May 21, 2010 | 01:04 AM
  #337  
tephra's Avatar
Thread Starter
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
RC4 of 52680022 (2008 USDM GSR) sent out to testers (hopefully someone tests something soon hehe)
RC1 of 52690022 (2008 USDM MR) sent to a few guys

Lets get this party started!
Reply
Old May 21, 2010 | 05:27 AM
  #338  
E6-X's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2009
Posts: 482
Likes: 0
From: earth
nice ... but still waiting for test
Reply
Old May 21, 2010 | 05:57 AM
  #339  
tephra's Avatar
Thread Starter
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
yep your ROMID is next
Reply
Old May 21, 2010 | 06:07 AM
  #340  
E-SPEC INDUSTRIES's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Dec 2009
Posts: 612
Likes: 0
From: NY
I would love to be involved with beta testing Tephra...

4kinboost at gmail dot com
Reply
Old May 21, 2010 | 06:24 AM
  #341  
xPRimNT's Avatar
Evolved Member
iTrader: (4)
 
Joined: Feb 2008
Posts: 610
Likes: 0
From: Edmonton, Alberta
Originally Posted by tephra
RC4 of 52680022 (2008 USDM GSR) sent out to testers (hopefully someone tests something soon hehe)
RC1 of 52690022 (2008 USDM MR) sent to a few guys

Lets get this party started!
I've been slacking on the GSR testing, but my exam is today. After that, I have time. Should have it running around today, hopefully with testing the failsafe ground by Saturday afternoon.

Also, keep me in the loop on the MR testing, I have an MR I'm working on too.
Reply
Old May 21, 2010 | 07:55 AM
  #342  
E6-X's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2009
Posts: 482
Likes: 0
From: earth
Originally Posted by tephra
yep your ROMID is next
wohoooooo stick everything in
Reply
Old May 21, 2010 | 08:35 AM
  #343  
sailing217's Avatar
Newbie
iTrader: (1)
 
Joined: May 2010
Posts: 29
Likes: 0
From: Cleveburgh
I'm getting my 08' MR Tuned RIGHT NOW. Cannot find ROM in their system. I'll PM Tepha now.

FYI, I just had the 'cold weather' TSB done last week. Probably the issue. Can you just throw an older image over top like the 21???? Then have a custom tune. I'm at a top tuning shop in the USA right now.

THX
Reply
Old May 21, 2010 | 08:42 AM
  #344  
sailing217's Avatar
Newbie
iTrader: (1)
 
Joined: May 2010
Posts: 29
Likes: 0
From: Cleveburgh
Tephra: your mailbox is full.

Latest ROM in in the tuner's ecutek is '19'

Agggg, it's sitting on the dyno right now. Anyone want to email me the 21 or 22 ROMs?

Thanks in advance
Reply
Old May 21, 2010 | 09:02 AM
  #345  
Golden's Avatar
Evolved Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 1,456
Likes: 0
From: Omaha, NE
Read his sig:
"yes - I have given up emptying my Inbox"

Just email him at <his forum name> at gmail
Reply



All times are GMT -7. The time now is 05:33 PM.