Nevermind, got it

 

Bump.

Would like to see if there is a fix yet for:

Idle
mode 23

and is there a lean spool table on the 2010 gsrs?

 

Mode 23 had been out for awhile for the 2010's. do a search.

Lean Spool is on/off in the periphery tables.

- Bryan

 

Is there any updates to the idle tables, etc...?

 

Okay, what about the idle tables though?

 

bump

 

thanks

 

is there a .hex file for the 2010 GSR's floating around yet?

 

I have used the acamus xml file and the hex file I have found for the 2010 Rom.

This file shows all mapped (known, according to the xml definition file) differences between the 2008 (52680020) and 2010 (55570005) Evo X.

There was a lot of unmapped diferences.

Between the differences, what looks interesing are:

- Knock Filter tables: have they solved those false knocks at 6000-7000?
- Throttle Map tables: any throttle response improvement?
- Mivec Intake tables: Intake #1 and #2 are different?

Other changes are seen at:
- Airflow Check #1 (units);
- Evap Map #1 (AFR);
- EGR Timing Advance (degrees);
- Lower Bound Ignition Timing (degrees);
- Upper Bound Ignition Timing (degrees);
- Throttle Conditional Switch (units);

Do you know how could these differences translates into performance, reliability, driveability advances?

Thank you,
Ziki

 

the knockfilter tables are incorrectly defined.

the real knock tables arn't any different between 2008 and 2010...

 

Is there any updated xml file?

Thank you,
Ziki

 

probably floating around...

if Colby gives me access to update the XML's in the ecuflash repo I will do it then...

 

i just pulled out the 55580005 from the 2010 usdm MR. Anyone get anywhere with this ROM yet? xml?

R

 

Tephra,

What are the knock filter tables that we are seeing then?