Kansas tune
my car idles around 1k and when i let off the gas it kinda stays around the same RPM, like when im backing up. ive owned a turbo honda before and it pulled real hard in the higher RPM it seems like the evo kinda flatens out after 5500RPM, normal? compaired to a fully built B16a2?
one last thing, the accessport can some one elaborate more on this? cost 500 bucks? and you can pull a map off the web and upload it to your ECU? thanks in advance im new to the Evo sceen
one last thing, the accessport can some one elaborate more on this? cost 500 bucks? and you can pull a map off the web and upload it to your ECU? thanks in advance im new to the Evo sceen
The turbo on the evo is designed for mid-range... your Honda probably had a larger turbo on it (or the motor had a better VE at higher RPM and couldn't over-spin the turbo).
All of the basic product information on acessport can be found on their website, and presented in a much better fashion than anyone can describe in a forum.
We can't help with your idle problem without a better description, but this thread really isn't the place for any of these questions. I encourage you to possibly start a thread in evo general if you can't find the answers you are looking for on your own.
Last edited by fostytou; Jun 8, 2011 at 08:21 AM.
"I know you are a new member, but please put in a bit of effort to search and/or find information on your own"
- agreed, i just jumped to the subject since i seen someone ask a similar question.
thanks for the info.
- agreed, i just jumped to the subject since i seen someone ask a similar question.
thanks for the info.
I need a little help from someone at fort riley. I just got an 03 evo VIII, and it seems to be overboosting, because I get alot of boost between 3000, and 4500, and then the BOV sputters and it just flattens out. I'm pretty sure it needs a tune, and the damn boost controller needs some tinkering, but to be completely honest, this is the first turbo'd engine I've run before, so this is a new animal to me. I'm willing to figure it out lol, just need some veteran help. thanks
Thread
Thread Starter
Forum
Replies
Last Post




