Cobb AP Stage 1 AEM map question
#1
Newbie
Thread Starter
Join Date: Nov 2010
Location: Virginia
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Cobb AP Stage 1 AEM map question
I just recently flashed my ECU with the Cobb AP Stage 1 AEM 93 octane map and did some data logging to see my results. I recorded a quick 3k - 7k rpm pull in 3rd gear and it looks like I'm hitting a peak boost of about 23 psi tapering down to about 20 psi. Knock looks ok, there were a few spots where I saw a 0.35 jump but never higher than that. I noticed there's no option to record AFR, I'm assuming I need to install a wideband sensor to see that data. Do those numbers look ok? What else should I be looking for? My car is stock with the exception of the AEM intake.
Thread
Thread Starter
Forum
Replies
Last Post
SOG RA
09+ Ralliart Engine/Turbo/Drivetrain
34
Sep 17, 2015 09:14 PM