Rich, bits work the other way. 00000001 is bit 0, i.e. 2^0. 00001000 is bit 3, 2^3 or 8 or 0x08.

 

does this make it impossible to heel-toe?

 

Heel-toe is still do-able, just brakes plus WOT for about 2 seconds and the car just falls on its face.

 

Funny, that's the way I've always referred to them too. I wonder if the M32R assem stuff is flipping the 0-7 reference? I don't have the doc in front of me now, but I seem to recall that assembler instruction manual referencing bits with a "1 rolled left by (7-bit)"! If so, I'll have to translate from my disassembled text file to sane-techie speak.

Or perhaps it's simpler than that - perhaps I've just gone completely mad reading all this code.

Rich

 

seems above 2500 i can do it ...?

 

I have no problem Brake boosting in my 2011 Evo X.

 

How much boost are you holding and for how long ?

 

any luck finding anything rich?

 

In for results, more so curious than anything.

 

I'm still rummaging around, in between doing a few other ROM-related things.

I've found a few new interesting bits on the way, but no smoking gun with this issue. If it happened on my car, I'm sure I'd have sussed it by now, as it would help to be able to reproduce it while logging the various throttle calcs at point A, B, C, D... That way I could zero in on where it was actually happening without having to be a real genius.

Rich

 

Rich,

If you need any type of special logs etc let me know I am willing to help in any way possible.

 

Awesome, yes please. I'll pm you once I've collected together the addresses to log.

Rich

 

i also cant either

 

Bumping to see if there are any updates...

 

I've been lurking in this thread since you published it. Although i dont have any solutions i wanted to mention that i run into the same issue while trying to B-boost in my 2011 X.