New tuner, need some advice.
#1
Newbie
Thread Starter
Join Date: Jun 2012
Location: Des Moines, IA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
New tuner, need some advice.
I have included in this post a .bin file from my ECUFlash ceddy mod rom. I have a log of a pull also included in excel. I did some data runs and I seem to be holding 11:1 at WOT according to my wideband without knock. The car idles great now after some tweeks. Im trying to figure out how I should proceed with this basic tune. I havn't touched the timing tables yet.
I'm pumping 15 pounds with a s16g, with walbro 255 and 650cc fic injectors.
Thank you for your time.
Could a moderator please move this to the 1-9 tuning forum?
*Disclaimer, I'm not asking for anyone to tune my car, just general advice and tips.
I'm pumping 15 pounds with a s16g, with walbro 255 and 650cc fic injectors.
Thank you for your time.
Could a moderator please move this to the 1-9 tuning forum?
*Disclaimer, I'm not asking for anyone to tune my car, just general advice and tips.
Last edited by shanebro; Oct 1, 2012 at 03:07 PM.
#3
Newbie
Thread Starter
Join Date: Jun 2012
Location: Des Moines, IA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to shave some afr in the midrange. What I did was focus on WOT, stealing some load axis's from the low load area and giving it to the high load to give me more flexibility up top. I smoothed the rest of the map out as best I could.
I would also like to start attacking the timing aspect but I'm a bit cautious. I've heard that DSMs have a pretty aggressive timing table to begin with, but they have made the afr maps a lil bit too rich for reliability. My first post includes a rom with my current timing table.
I would also like to start attacking the timing aspect but I'm a bit cautious. I've heard that DSMs have a pretty aggressive timing table to begin with, but they have made the afr maps a lil bit too rich for reliability. My first post includes a rom with my current timing table.
Thread
Thread Starter
Forum
Replies
Last Post