P0017 code
#1
Newbie
Thread Starter
Join Date: Dec 2012
Location: new york
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
P0017 code
I've changed the crank sensor and oil control valve exhaust side. And keep getting the code back . I check the chain it doesn't have stretch what could I be missing?
#3
Newbie
Thread Starter
Join Date: Dec 2012
Location: new york
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
#4
Just going to put in my two sense here. So I orginally got this same code p0017. Figured it was timing chain due to being at 52000 miles. Upgraded the timing chain, went to the dealership and had them do the timing chain re learn value. Replaced both of the sensors. After this still pulling the same code. Had the car sent to my tuner to have some adjustments done and they did there best to diagnose it as well. What they told me was most likely your cam gear is stuck. Just wanted to give everyone that has tried everything else something else to look out for.
#5
Just going to put in my two sense here. So I orginally got this same code p0017. Figured it was timing chain due to being at 52000 miles. Upgraded the timing chain, went to the dealership and had them do the timing chain re learn value. Replaced both of the sensors. After this still pulling the same code. Had the car sent to my tuner to have some adjustments done and they did there best to diagnose it as well. What they told me was most likely your cam gear is stuck. Just wanted to give everyone that has tried everything else something else to look out for.
#6
So how about your tune? Do you have a tune on your car?
Thread
Thread Starter
Forum
Replies
Last Post
ThugzNHarmony
Evo X Engine Management / Tuning Forums
2
Jan 14, 2013 09:40 AM