PASSThru CAN Utility ECU communication error
Jul 22, 2017, 07:06 AM
#1
Newbie
Thread Starter
Join Date: Jul 2017
Location: Sydney
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
PASSThru CAN Utility ECU communication error
Any gurus willing to help with getting my TCU communicating with PassThru Can Utility? It keeps throwing ECU communication error check ign or wiring harness at me. I've tried tactrix drivers from the beginning 1.29a through to 1.44 and bugger all luck. I've also tried windows 7 and XP
Jul 24, 2017, 06:01 AM
#2
Newbie
Thread Starter
Join Date: Jul 2017
Location: Sydney
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Any gurus willing to help with getting my TCU communicating with PassThru Can Utility? It keeps throwing ECU communication error check ign or wiring harness at me. I've tried tactrix drivers from the beginning 1.29a through to 1.44 and bugger all luck. I've also tried windows 7 and XP
Aug 8, 2017, 12:26 PM
#4
Newbie
try the following:
move the files GENERIC_ENG_AT_010001_dio30.cbf and GENERIC_AT_dio30.cbf from C:\Program Files\PassThruCAN\DiagDB\CBF to C:\Program Files\PassThruCAN and try to communicate to ECU again.
I had this issue before and I the only file I let at directory was AMT_17800000_000204_dio30_C.cbf.
With this you can read the ECUID. For teach in procedures you need to have those files back. I guess.
move the files GENERIC_ENG_AT_010001_dio30.cbf and GENERIC_AT_dio30.cbf from C:\Program Files\PassThruCAN\DiagDB\CBF to C:\Program Files\PassThruCAN and try to communicate to ECU again.
I had this issue before and I the only file I let at directory was AMT_17800000_000204_dio30_C.cbf.
With this you can read the ECUID. For teach in procedures you need to have those files back. I guess.
Thread
Thread Starter
Forum
Replies
Last Post
rawkus123
09+ Ralliart Engine/Turbo/Drivetrain
3
Jul 20, 2017 05:19 AM
Grip Master
ECU Flash
3
Feb 2, 2013 06:21 PM