Gauge Not matching Evoscan Logs
#1
Newbie
Thread Starter
Gauge Not matching Evoscan Logs
Hi, So after looking at some 3rd gear WOT pull Logs i noticed that the AFR and Boost values are little off from what I see on my Zeitronixs Zt-2 LCD display.
Both Boost and Afr are off when i go back and look at the Evoscan Log. Afr on LCD display shows peak AFR at 10.4 evoscan 11.4 and boost is higher on the gauge by like 2-3 psi.
Anyone have experience with this?
Both Boost and Afr are off when i go back and look at the Evoscan Log. Afr on LCD display shows peak AFR at 10.4 evoscan 11.4 and boost is higher on the gauge by like 2-3 psi.
Anyone have experience with this?
Thread
Thread Starter
Forum
Replies
Last Post