T1R 76S Exhaust Prototype Pics
#31
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Jan 2008
Location: Vancouver, Canada
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
We are the exclusive distributor for T1R Evo X products and are actively involved in the product development and testing. However, manufacturing is handled by T1R.
#34
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Jan 2008
Location: Vancouver, Canada
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I don't have any cutaway pics. Basically the muffler design is a straight through design. The exhaust comes into the muffler, and the flow is split in two, each path going direct to one of the muffler tips. There are no actual chambers that force the exhaust into 180 degree turns and such. It's a very high flow, straight through design.
#37
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Jan 2008
Location: Vancouver, Canada
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Great point about the aerodynamic function of the muffler. Such a large hole in front of the rear diffuser must reduce top speed a bit. Would be nice if some of the track guys could test this.
#40
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Jan 2008
Location: Vancouver, Canada
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
https://www.evolutionm.net/forums/sh...d.php?t=349929
Final specs, sound clips, and dyno's we will be working on dilligently for the next few weeks. We'll post as soon as they become available.
The T1R 76S exhaust will be available in early July, and the plan is for it to be a semi-turbo back exhaust. It will come with down pipe, test pipe, and cat back (b-pipe and muffler). The O2 housing / up pipe will be optional for a complete turbo back.
Last edited by dD Spikey; Jun 11, 2008 at 12:58 AM.