PERRIN EVO X Turbo back build...
Nov 23, 2008, 01:58 AM
#181
Newbie
Join Date: May 2007
Location: CA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
In this image from the perrin page, it shows the dp/hfc pipe has two sensor bungs. I know one is required for the o2 sensor. Is the 2nd one for an aftermarket sensor (wideband, etc.)?
Nov 23, 2008, 06:23 AM
#182
Newbie
Join Date: Jan 2008
Location: STL
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
No. The stock X has to 02 sensors: 1 before the cat and 1 after. The one before the cat is a bit harder to see.
I wish it did have a spot for a wideband. I just had a wideband bung welded into my Perrin yesterday.
Install was extremely smooth; fit was perfect. Exhaust has a nice low growl. Those Perrin boys know what they are doing.
I soaked my 02 sensors with liquid wrench several hours before install, and they both came right off. I did not experience the issues that others have had with them. That was a relief.
I'm redynoing to see where I am at today, and then next installing the Perrin intercooler and routing the wideband, map sensor, and mounting gauge.
I wish it did have a spot for a wideband. I just had a wideband bung welded into my Perrin yesterday.
Install was extremely smooth; fit was perfect. Exhaust has a nice low growl. Those Perrin boys know what they are doing.
I soaked my 02 sensors with liquid wrench several hours before install, and they both came right off. I did not experience the issues that others have had with them. That was a relief.
I'm redynoing to see where I am at today, and then next installing the Perrin intercooler and routing the wideband, map sensor, and mounting gauge.
Dec 1, 2008, 01:44 PM
#184
Evolved Member
Join Date: May 2008
Location: Oklahoma City
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
No. The stock X has to 02 sensors: 1 before the cat and 1 after. The one before the cat is a bit harder to see.
I wish it did have a spot for a wideband. I just had a wideband bung welded into my Perrin yesterday.
Install was extremely smooth; fit was perfect. Exhaust has a nice low growl. Those Perrin boys know what they are doing.
I soaked my 02 sensors with liquid wrench several hours before install, and they both came right off. I did not experience the issues that others have had with them. That was a relief.
I'm redynoing to see where I am at today, and then next installing the Perrin intercooler and routing the wideband, map sensor, and mounting gauge.
I wish it did have a spot for a wideband. I just had a wideband bung welded into my Perrin yesterday.
Install was extremely smooth; fit was perfect. Exhaust has a nice low growl. Those Perrin boys know what they are doing.
I soaked my 02 sensors with liquid wrench several hours before install, and they both came right off. I did not experience the issues that others have had with them. That was a relief.
I'm redynoing to see where I am at today, and then next installing the Perrin intercooler and routing the wideband, map sensor, and mounting gauge.
Dec 3, 2008, 07:01 PM
#185
Evolved Member
im sure this question has been asked a million time b4 and i dont feel like reading through the entire thread but what is the reason you guys didnt offer the o2/dp housing b/c other ppl said they found no gains i know this has been prolly asked a thousand times but i never heard none of the responses and is there a chance you might release one later on?
Dec 5, 2008, 08:27 AM
#186
Former Sponsor
Thread Starter
Join Date: May 2003
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
im sure this question has been asked a million time b4 and i dont feel like reading through the entire thread but what is the reason you guys didnt offer the o2/dp housing b/c other ppl said they found no gains i know this has been prolly asked a thousand times but i never heard none of the responses and is there a chance you might release one later on?
Its not to say that we will not make one, but its not first on the list. In the end it would be an expensive part that would look really cool but may not do much. And BTW it is a pain to install! When we installed our BLOUCH polka pickle on the EVO, that was the biggest pain to deal with.
