Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

Official Evolution X Exhaust Thread

Thread Tools
 
Search this Thread
 
Old Jan 25, 2009 | 09:47 AM
  #46  
smgevo's Avatar
Evolving Member
iTrader: (1)
 
Joined: Sep 2008
Posts: 303
Likes: 4
From: Los Angeles
Due to the differences in video equipment sound quality and the tiny speakers we listen to this clips with, it would be nice to see before and after sound clips from the same camera and same angle and conditions to best hear the differences between the stock and aftermarket exhausts from each member doing the upgrade like the ones I just posted. For those who have not yet done the upgrade, a pre and post sound clip would be appreaciated thank you
Reply
Old Jan 25, 2009 | 10:02 AM
  #47  
tomatoEVO's Avatar
Account Disabled
iTrader: (9)
 
Joined: Sep 2007
Posts: 991
Likes: 0
From: 私の家
Originally Posted by Td66
Part out for what? A G-37, maybe a Hemi, not a me-too mustang? New 370 sounds nice.
370 sounds enticing, but i really don't wanna lose all that interior room.
Reply
Old Jan 25, 2009 | 10:04 AM
  #48  
Mojito's Avatar
Evolving Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 294
Likes: 0
From: Moscow, Russia
Originally Posted by smgevo
Due to the differences in video equipment sound quality and the tiny speakers we listen to this clips with, it would be nice to see before and after sound clips from the same camera and same angle and conditions to best hear the differences between the stock and aftermarket exhausts from each member doing the upgrade like the ones I just posted. For those who have not yet done the upgrade, a pre and post sound clip would be appreaciated thank you
This will not help due to the autolevelling function of most camcoders. It will adjust dynamic range of the sound, so in absolute volume the loudest exhaust will sound the same as the quietest.
Reply
Old Jan 25, 2009 | 01:31 PM
  #49  
arbo651's Avatar
Evolved Member
iTrader: (10)
 
Joined: Oct 2006
Posts: 502
Likes: 1
From: PA
http://www.youtube.com/watch?v=nIlc0JU0pm8
Buschur with test pipe
Reply
Old Jan 25, 2009 | 06:25 PM
  #50  
smgevo's Avatar
Evolving Member
iTrader: (1)
 
Joined: Sep 2008
Posts: 303
Likes: 4
From: Los Angeles
Originally Posted by Mojito
This will not help due to the autolevelling function of most camcoders. It will adjust dynamic range of the sound, so in absolute volume the loudest exhaust will sound the same as the quietest.
Regardless of the volume level be equalized, I still believe there should be a distinct difference in tonal frequencies registered by the same camera, wouldn't you agree? We should therefore be able to "hear" a deep throaty low tone vs a high tinny tone and those inbetween. I am not an expert at all, but it seems that even if the volume levels were compensated for, the exhaust clip I posted of stock vs ETS will still show a distinct difference in tonality.
Reply
Old Jan 26, 2009 | 12:21 AM
  #51  
Mojito's Avatar
Evolving Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 294
Likes: 0
From: Moscow, Russia
Originally Posted by smgevo
Regardless of the volume level be equalized, I still believe there should be a distinct difference in tonal frequencies registered by the same camera, wouldn't you agree? We should therefore be able to "hear" a deep throaty low tone vs a high tinny tone and those inbetween. I am not an expert at all, but it seems that even if the volume levels were compensated for, the exhaust clip I posted of stock vs ETS will still show a distinct difference in tonality.
I would agee that the tones will be different, but after youtube "processing" these tones will be so distorted that they won't be even close to the original sound.
What you could do though, is to take the uncompressed audio stream from your recording and upload it as a separate file or mp3 file. Then you'll probably get something similar to the original tone.
Reply
Old Jan 30, 2009 | 11:34 PM
  #52  
Clark_Kent's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Apr 2006
Posts: 1,070
Likes: 0
From: Smallville, KS
First post has been updated. I am still awaiting a few emails from some manufacturers. I will update this as frequently as possible.
Reply
Old Jan 31, 2009 | 11:31 AM
  #53  
x818king's Avatar
Newbie
 
Joined: Oct 2008
Posts: 57
Likes: 0
From: 818 socal
pics of the new agency power dual exit?? and good videos anyone?
Reply
Old Jan 31, 2009 | 02:17 PM
  #54  
skylinegtr35's Avatar
Evolving Member
iTrader: (7)
 
Joined: Nov 2003
Posts: 110
Likes: 0
From: West Lafayette, IN
Anyone with the Blitz Nur-Spec R? I really want to hear how it sounds like!
Reply
Old Jan 31, 2009 | 11:47 PM
  #55  
Mojito's Avatar
Evolving Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 294
Likes: 0
From: Moscow, Russia
Originally Posted by Clark_Kent
First post has been updated. I am still awaiting a few emails from some manufacturers. I will update this as frequently as possible.
Great work, thanks!
Reply
Old Feb 1, 2009 | 12:19 AM
  #56  
dierr's Avatar
Newbie
iTrader: (2)
 
Joined: Aug 2008
Posts: 77
Likes: 0
From: Seattle
i just saw the video of the artisan exhaust.. is this true? from just a catback?
correct me if i'm wrong but i saw more than 60 hp gain? hopefully its with a tune?

http://www.youtube.com/watch?v=vxUUiZlA9CM
Reply
Old Feb 1, 2009 | 12:45 AM
  #57  
nawaz's Avatar
Evolving Member
 
Joined: Oct 2007
Posts: 336
Likes: 0
From: Plano, Texas
I'm not a X owner, but I looked at the pictures in the beginning of this thread and I think the Ultimate Racing Dual Exit Catback setup looks the best.
Reply
Old Feb 1, 2009 | 02:18 PM
  #58  
Clark_Kent's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Apr 2006
Posts: 1,070
Likes: 0
From: Smallville, KS
Originally Posted by x818king
pics of the new agency power dual exit?? and good videos anyone?
Done
Reply
Old Feb 2, 2009 | 01:48 AM
  #59  
x818king's Avatar
Newbie
 
Joined: Oct 2008
Posts: 57
Likes: 0
From: 818 socal
that agency power just posted is the older one. they have 2 can type out now.
Reply
Old Feb 2, 2009 | 01:31 PM
  #60  
cchan3761's Avatar
Evolving Member
 
Joined: Jun 2008
Posts: 152
Likes: 0
From: Fresno, Ca
Originally Posted by CaptainStevo
Has anyone preorderd the speed circuit exhaust yet? def the best in my opinion
Ordered mine about a week ago. The preorder shipments are almost due to be shipped, the first batch is being shipped in a bout 2 weeks and I can't wait to put it on.
Reply



All times are GMT -7. The time now is 11:34 PM.